TRENDnet TEW-635BRM Router Manual PDF (Setup & Configuration Guide)

Given below is full router user manual of TRENDnet TEW-635BRM router model. You can also download this manual in PDF Format to read later on your computer.

Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.

Page 1 / 18
Quick Installation Guide
TEW-635BRM
2.01
Page 2 / 18
English
1
9
Wireless Tips
11
1. Before You Start
1
2. Hardware Installation
3
3. Configure The Modem
4
4. Setting up Encryption
7
Tõrkeotsing
Table of Contents
Version 01.04.2010
Page 3 / 18
1. Before You Start
Package Contents
System Requirements
1
?
?
?
Multi-Language Quick Installation Guide
?
2 x 2dBi Detachable Antenna
?
1 x RJ-45 Ethernet Cable
?
1 x RJ-11 Telephone Cable
?
Power Adapter (12V DC, 1A)
CD-ROM (User’s Guide)
TEW-635BRM
?
?
A computer with a wired or wireless network adapter properly installed
?
A working ADSL Internet Connection
Web Browser: Internet Explorer (5.0 or above)
Page 4 / 18
2
Collect Internet Service Provider (ISP) Information
During the installation of your Wireless ADSL Modem Router, the Setup Wizard will
automatically detect your ISP connection type. If the router cannot detect your ISP
connection type, you can manually specify the connection type. Please verify your DSL
Internet broadband connection type with your ISP and ensure you have all the
information for one of the following connection types:
A. Dynamic IP connection
ADSL Modem parameters (VPI and VCI) and multiplexing method type
(LLC or VC) , if it cannot be detected automatically.
ISP may require you to use a particular
Hostname
or
Domain
name.
B. Static or Fixed IP connection
Internet IP Address:_____. _____._____._____ (e.g. 215.24.24.129)
Subnet Mask: _____. _____._____._____
Gateway IP Address: ____. _____._____._____
Primary DNS:_____. _____._____._____
Secondary:_____. _____._____._____
ADSL Modem Parameters (VPI and VCI), if it cannot be detected
automatically.
C. PPPoE or PPPoA Dynamic IP connection
Login User Name: _________
Password: ________________
ADSL Modem Parameters (VPI and VCI), if it cannot be detected
automatically.
D. IPoA Static or Fixed (IP over ATM) connection
Internet IP Address:_____. _____._____._____ (e.g. 215.24.24.129)
Subnet Mask: _____. _____._____._____
Gateway IP Address: ____. _____._____._____
Primary DNS:_____. _____._____._____
Secondary:_____. _____._____._____.
ADSL Modem Parameters (VPI and VCI), if it cannot be detected
automatically.
Page 5 / 18
ADSL
Terminator
To PCs
Power
Power
LAN1
LAN2
LAN3
LAN4
ADSL
2. Hardware Installation
3
2.
Connect one end of the RJ-45 cable to one of
the TEW-635BRM's LAN ports.
Connect the
other end of cable to the computer's Ethernet
port.
4.
Connect the AC Power Adapter to the TEW-
635BRM and then to a power outlet.
3.
Connect one end of the RJ-11 cable to the
TEW-635BRM's ADSL port.
Connect the other
end of the cable to the phone jack.
RESET
1.
Connect the detachable antennas to the
TEW-635BRM.
5.
Verify that the following panel lights are on:
Power
(solid Green)
, LAN
(solid to blinking
Blue),
Wireless
(Solid Blue),
DSL
(solid Green)
and
Internet
(blinking Orange)
.
Note:
If the DSL light is not solid Green (blinking), the device would not detect the DSL
signal. The Internet light may
take up to 5minutes to detect, please wait.

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top