Page 6 / 12 Scroll up to view Page 1 - 5
English
4
10.
Write down the new router
information on the CD sleeve for
your own reference and click
Next
.
9.
Select a encryption type and enter
the security key for your wireless
network and then click
Next
.
Note: For wireless clients, please make sure the SSID and the encryption
information matches the router settings.
11.
When this screen appears, the
router has been configured
successfully, click
Next
.
Page 7 / 12
12.
Select
Exit Router Setup
and
then click
Finish
.
For detailed information regarding the TEW-633GR configuration and
advanced settings, please refer to the User's Guide included on the Easy Go
Installation CD-ROM or TRENDnet's website at www.trendnet.com.
Your installation is now complete.
English
5
Page 8 / 12
English
6
1.
To replace current router, select
Yes
and then click
Next
.
Note: When this window appears, it means you have a DSL/Cable modem
router. If you are replacing the current router with the wireless TEW-633GR,
please select
Yes
and click
Next
to continue. If you are adding the wireless
router behind the current connection, please select
No
and click
Next
to
continue.
2.
Follow the Wizard instructions and
continue through the remaining
installation steps. Click
Next
.
When
secure access to your
router
window appears, please go
to
section 2 step 7
to continue.
3. Adding the router behind an existing router
To replace current router
Page 9 / 12
For detailed information regarding the TEW-633GR configuration and
advanced settings, please refer to the User's Guide included on the Easy Go
Installation CD-ROM or TRENDnet's website at www.trendnet.com.
Your installation is now complete.
2.
Follow the Wizard instructions and
continue through the remaining
installation steps. Click
Next
.
When
secure access to your
router
window appears, please go
to
section 2 step 7
to continue.
Register Your Product
To ensure the highest level of customer service and support, please take a moment to
register your product Online at:
www.TRENDnet.com/registe
r
Thank you for choosing TRENDnet
English
7
1.
To add the wireless router behind
your current network, select
No
and then click
Next
.
To add the router
Page 10 / 12
8
Troubleshooting
Q1:
A1:
Q2:
A2:
Q3:
A3:
Q4:
A4:
Q5:
A5:
Q6:
A6:
I inserted the Easy Go CD-ROM into my computer's CD-ROM drive and the installation menu does not
appear automatically. What should I do?
If the installation menu does not appear automatically, click
Start
, click
Run
, and type
D:\Autorun.exe
where "D" in "D:\Autorun.exe" is the letter assigned to your computer's CD-ROM Drive.
And then click
OK
to start the Installation.
How can I get into the TEW-633GR web configuration page?
After you install the TEW-633GR Wireless Router, you can access the web configuration page by
opening your web browser and entering http://192.168.10.1 into the web browser's address bar, where
is the default IP address of the TEW-633GR Wireless Router.
I am not sure what type of Internet Account Type I have for my Cable/DSL connection. How do I find out?
Contact your Internet Service Provider's (ISP) Customer Service for the correct information.
I received an error message while running the Easy Go Setup Wizard. What should I do?
Make sure that your computer's CD-ROM is in working condition. Also verify that all cable connections
are secure and that you are able to connect to the Internet, and then retry installing the router. During
setup, the Easy Go Setup wizard will check the operation of your network adapter and Internet connection.
If the 111 error message appears, you may need to change the IP address of the router.
All the settings are correct, but I can not make a wireless connection to the Router.
What should I do?
First, make sure that the WLAN switch on the back of the router is set to on.
Second, double check
that the WLAN light on the Router is lit.
Third, power cycle the TEW-633GR.
Unplug the power to the
TEW-633GR.
Wait 15 seconds, then plug the power back in to the TEW-633GR.
Fourth, contact the
manufacturer of your wireless network adapter and make sure the wireless network adapter is configured
with the proper SSID.
After I finish installing the router, then Network Magic Installation Wizard appears.
What should I do?
Network Magic™ is an optional bonus program.
It works with your router to setup, manage, repair
and protect your home network.
To install Network Magic, go to Easy Go CD-ROM and select
Bonus/
Install Network Magic™
, click
Next
and then follow the Installation Wizard instructions.
If you still encounter problems or have any questions regarding the TEW-633GR, please refer to the User's Guide
included on the Easy Go Setup CD-ROM or contact Trendnet's Technical Support Department.

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top