English

4

10.

Write down the new router

information on the CD sleeve for

your own reference and click

Next

.

9.

Select a encryption type and enter

the security key for your wireless

network and then click

Next

.

Note: For wireless clients, please make sure the SSID and the encryption

information matches the router settings.

11.

When this screen appears, the

router has been configured

successfully, click

Next

.

12.

Select

Exit Router Setup

and

then click

Finish

.

For detailed information regarding the TEW-632BRP configuration and

advanced settings, please refer to the User's Guide included on the Easy Go

Installation CD-ROM or TRENDnet's website at www.trendnet.com.

Your installation is now complete.

English

5

English

6

1.

To replace current router, select

Yes

and then click

Next

.

Note: When this window appears, it means you have a DSL/Cable modem

router. If you are replacing the current router with the wireless TEW-632BRP,

please select

Yes

and click

Next

to continue. If you are adding the wireless

router behind the current connection, please select

No

and click

Next

to

continue.

2.

Follow the Wizard instructions and

continue through the remaining

installation steps. Click

Next

.

When

secure access to your

router

window appears, please go

to

section 2 step 7

to continue.

3. Adding the router behind an existing router

To replace current router

For detailed information regarding the TEW-632BRP configuration and

advanced settings, please refer to the User's Guide included on the Easy Go

Installation CD-ROM or TRENDnet's website at www.trendnet.com.

Your installation is now complete.

2.

Follow the Wizard instructions and

continue through the remaining

installation steps. Click

Next

.

When

secure access to your

router

window appears, please go

to

section 2 step 7

to continue.

Register Your Product

To ensure the highest level of customer service and support, please take a moment to

register your product Online at:

www.TRENDnet.com/registe

r

Thank you for choosing TRENDnet

English

7

1.

To add the wireless router behind

your current network, select

No

and then click

Next

.

To add the router

8

Troubleshooting

Q1:

A1:

Q2:

A2:

Q3:

A3:

Q4:

A4:

Q5:

A5:

Q6:

A6:

I inserted the Easy Go CD-ROM into my computer's CD-ROM drive and the installation menu does not

appear automatically. What should I do?

If the installation menu does not appear automatically, click

Start

, click

Run

, and type

D:\Autorun.exe

where "D" in "D:\Autorun.exe" is the letter assigned to your computer's CD-ROM Drive.

And then click

OK

to start the Installation.

How can I get into the TEW-632BRP web configuration page?

After you install the TEW-632BRP Wireless Router, you can access the web configuration page by

opening your web browser and entering http://192.168.10.1 into the web browser's address bar, where

http://192.168.10.1

is the default IP address of the TEW-632BRP Wireless Router.

I am not sure what type of Internet Account Type I have for my Cable/DSL connection. How do I find out?

Contact your Internet Service Provider's (ISP) Customer Service for the correct information.

I received an error message while running the Easy Go Setup Wizard. What should I do?

Make sure that your computer's CD-ROM is in working condition. Also verify that all cable connections

are secure and that you are able to connect to the Internet, and then retry installing the router. During

setup, the Easy Go Setup wizard will check the operation of your network adapter and Internet connection.

If the 111 error message appears, you may need to change the IP address of the router.

1) Open up Internet explorer, type into the address bar

http://192.168.10.1 and hit enter.

2) Click on

Basic -> Network Settings

.

3) Under

Router Settings,

change the Router IP address to 192.168.11.1.

4) Under

DHCP Server Settings

, change the DHCP IP Address Range to 192.168.11.101 to 192.168.11.200.

5) Click

Save Settings

.

All the settings are correct, but I can not make a wireless connection to the Router.

What should I do?

First, make sure that the WLAN switch on the back of the router is set to on.

Second, double check

that the WLAN light on the Router is lit.

Third, power cycle the TEW-632BRP.

Unplug the power to the

TEW-632BRP.

Wait 15 seconds, then plug the power back in to the TEW-632BRP.

Fourth, contact the

manufacturer of your wireless network adapter and make sure the wireless network adapter is configured

with the proper SSID.

After I finish installing the router, then Network Magic Installation Wizard appears.

What should I do?

Network Magic™ is an optional bonus program.

It works with your router to setup, manage, repair

and protect your home network.

To install Network Magic, go to Easy Go CD-ROM and select

Bonus/

Install Network Magic™

, click

Next

and then follow the Installation Wizard instructions.

If you still encounter problems or have any questions regarding the TEW-632BRP, please refer to the User's Guide

included on the Easy Go Setup CD-ROM or contact TRENDnet's Technical Support Department.