Page 11 / 20
Scroll up to view Page 6 - 10
9
English
The “Internet Setup” page will appear.
In the
Optional Settings
section,
enter a host name and domain name (if required by your ISP). Then, select
your Connection Type from the pull down menu, (Automatic Configuration -
DHCP, Static IP, PPPoE, or PPTP) and proceed to the appropriate subset of
instructions below.
Automatic Configuration - DHCP
3.
Select
Automatic Configuration - DHCP
as the Connection Type.
4.
Go to step 14.
Page 12 / 20
10
English
Static IP
5.
Select
Static IP Address
as the Connection Type.
6.
Enter the IP address, subnet mask, default gateway, and domain name
server (DNS) provided by your ISP.
7.
Go to step 14.
10
PPPoE
8.
Select
PPPoE
as the Connection Type.
9.
Enter your username and password.
10.
Go to step 14.
NOTE:
By default, the “keep alive” option will be selected; this is the
recommended setting for most users.
Page 13 / 20
11
English
PPTP
11.
Select
PPTP
as the Connection Type.
12.
Enter the IP Address, Subnet Mask, Default Gateway, PPTP Server IP,
username, and password provided by your ISP.
13.
Go to step 14.
14.
Scroll down to the
Time Settings
section, and select the appropriate
Time
Zone
from the pull down menu.
Click
Apply
, and proceed to the Wireless
Configuration Section of this Quick Installation Guide.
NOTE:
By default, the “keep alive” option will be selected; this is the
recommended setting for most users.
10
Page 14 / 20
12
English
5. Wireless Configuration
1.
Click
Wireless
. The recommended settings will be automatically selected for
you. You may, however, choose to select a different channel and/or network
name (SSID).
2.
Click
Apply
(at the bottom of the page).
NOTE:
You must remember your “network name (SSID),” as you will
need it when you configure your wireless network adapter to connect to
your access point. If you wish to enable WEP for encryption-based
security, refer to the included User's Guide CD-ROM for instructions.
Page 15 / 20
13
English
Configure your Wireless Network Adapter
In this example, the TEW-501PC Super A+G Wireless Utility will connect to the
TEW-511BRP.
1.
Open the wireless utility that came with your network adapter and click
AP List.
2.
Select the SSID that was assigned to TEW-511BRP.
Click
Connect.
19216811.live