Page 21 / 64 Scroll up to view Page 16 - 20
14
Windows Vista
Go to
Control Panel
Æ
Network and Sharing Center
Æ
click on
View Status
to
get the Local Area Connection status window
Downloaded from
www.Manualslib.com
manuals search engine
Page 22 / 64
15
Click on the
Properties
button for the property window
Click on TCP/IP settings and click on Properties, make sure it’s set to
Obtain an IP address automatically
”.
Downloaded from
www.Manualslib.com
manuals search engine
Page 23 / 64
Downloaded from
www.Manualslib.com
manuals search engine
Page 24 / 64
15
CONFIGURATION
First make sure that the network connections are functioning normally.
This WLAN Router can be configured using Internet Explorer 6.0 or newer web
browser versions.
Login to the WLAN Router through Wireless LAN
Before configuring the WLAN Router through WLAN, make sure that the SSID,
Channel and the WEP is set properly.
The default setting of the WLAN Router that you will use:
9
SSID: TRENDnet
9
Channel: 6
9
Security: disable
Login to the WLAN Router
Before you configure this device, note that when the WLAN Router, make sure the
host PC must be set on the
IP subnet
that can be accessed by the xDSL/Cable
modem. For example, when the default network address of the xDSL/Cable modem
Ethernet interface is 192.168.10.x, then the host PC should be set at 192.168.10.xxx
(where xxx is a number between 2 and 254), and the default subnet mask is
255.255.255.0.
Using the Web Browser
1.
Open Internet Explorer 6.0 or above Internet browser.
2.
Enter IP address
(the factory-default IP address setting) to
the URL web address location.
3.
When the following dialog box appears, enter the user name and password to
login to the main configuration window, the default username and password is
admin
”.
Downloaded from
www.Manualslib.com
manuals search engine
Page 25 / 64
16
Setup Wizard
Setup wizard is provided as part of the web configuration utility. User can simply
follow the step-by-step process to get the wireless Router configuration ready to run
in 6 easy steps by clicking on the “Wizard” button on the function menu. The
following screen will appear. Please click “Next” to continue.
Step 1: Set up new Password
User can change the password and then click “Next” to continue.
Downloaded from
www.Manualslib.com
manuals search engine

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top