Page 6 / 13
Scroll up to view Page 1 - 5
4
6.
Click on
Use the following IP address.
address and 255.255.255.0 for Subnet, then click
OK
.
8.
Your computer is now ready to access and configure the Access Point.
7.
Click
OK.
English
Page 7 / 13
5
4. Configure the Access Point
From a Wired Computer
1.
Open a web browser (Internet Explorer or Netscape) and enter
Enter
key.
Type
admin
for
username
, and type
admin
for your
password
.
Click
OK
.
English
2.
Click
Wizard
.
Page 8 / 13
6
3.
Click
Next
.
4.
If you want to change the default password, type in a new password and
click
Next
.
Otherwise, click
Next
.
English
Page 9 / 13
7
English
5.
If you want to change the default SSID or channel, type in the appropriate
information and click
Next
.
Otherwise, click
Next
.
6.
Click
Next
.
Page 10 / 13
8
English
7.
Click
Restart
and click
Close
.
Congratulations"
Installation is now complete.
From a Wireless Computer
(using TRENDnet's TEW-441PC as an example in this section)
The default settings of the Access Point are:
SSID - AP254f02
Channel - 6
8.
On your wireless computer, open up your Wireless Utility Program.
19216811.live