TRENDnet TEW-435BRMv2 Router Manual PDF (Setup & Configuration Guide)

Given below is full router user manual of TRENDnet TEW-435BRMv2 router model. You can also download this manual in PDF Format to read later on your computer.

Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.

Page 1 / 11
TEW-435BRM
Quick Installation Guide
Page 2 / 11
Table of Contents
Version 06.19.2006
English
......................................................................................................
Troubleshooting
........................................................................................
1
1
3
4
7
1. Before You Start
2. Install Hardware
.................................................................................
3.
.................................................................
.................................................................................
Configuration The Modem
Page 3 / 11
Installation Requirements
Application
A working DSL Internet Connection
A computer with a wired or wireless network adapter properly installed.
Package Content
1. Before You Start
English
1
TEW-435BRM
Quick Installation Guide
User's Guide CD-ROM
1 x 2dBi Detachable Antenna
1 x RJ-45 Ethernet Cable (Yellow)
1 x RJ-11 Telephone Cable (Gray)
Mounting Stand
Power Adapter
Web Browser: Internet Explorer (5.0 or higher) or Netscape Navigator
(4.7 or higher)
10/100Mbps
Phone Jack
ADSL Account
Ready Line
Internet
Notebook with
Wireless PC Card
(TEW-421PC)
54Mbps 802.11g ADSL
Modem Router
(TEW-435BRM)
Workstation with
Wireless PCI Adapter
(TEW-423PI)
Workstation with
PCI Adapter
(TE100-PCIWN)
54Mbps
Page 4 / 11
English
2
Collect Internet Service Provider (ISP) Information
During the installation of your Wireless ADSL Modem Router, the Setup Wizard
will automatically detect your ISP connection type. If the router cannot detect
your ISP connection type, you can manually specify the connection type.
Please verify your DSL Internet broadband connection type with your ISP and
ensure you have all the information for one of the following connection types:
A. Dynamic IP connection
ADSL Modem parameters (VPI or VCI), if it cannot be detected automatically.
ISP may require you to use a particular Hostname or Domain name.
B. Static or Fixed IP connection
Internet IP Address:_____. _____._____._____ (eg. 215.24.24.129)
Subnet Mask: _____. _____._____._____
Gateway IP Address: ____. _____._____._____
Primary DNS:_____. _____._____._____
Secondary:_____. _____._____._____
ADSL Modem Parameters (VPI or VCI), if it cannot be detected automatically.
C. PPPoE or PPPoA Dynamic IP connection
Login User Name: _________
Password: ________________
ADSL Modem Parameters (VPI or VCI), if it cannot be detected automatically.
D. IPoA Static or Fixed (IP over ATM) connection
Internet IP Address:_____. _____._____._____ (eg. 215.24.24.129)
Subnet Mask: _____. _____._____._____
Gateway IP Address: ____. _____._____._____
Primary DNS:_____. _____._____._____
Secondary:_____. _____._____._____.
ADSL Modem Parameters (VPI or VCI), if it cannot be detected automatically.
Page 5 / 11
English
3
2. Hardware Installation
2.
Connect one end of the yellow RJ-
45 cable to one of the
TEW-435BRM's LAN ports.
Connect the other end of cable to
the computer's Ethernet port. Then
connect the 2dBi detachable
antenna.
4.
Connect the AC Power Adapter to
the TEW-435BRM and then to a
power outlet.
1.
Attach the mounting stand to the
side of the unit.
5.
Verify that the following panel lights
are on:
Power, LAN, and WLAN.
3.
Connect one end of the gray RJ-11
cable to the TEW-435BRM's ADSL
port.
Connect the other end of the
cable to the phone jack.

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top