Page 6 / 17
Scroll up to view Page 1 - 5
4
3. Configure your AP/Router
English
The following section will help you configure your AP/Router to connect to the
Internet and your PCs. The setup differs and is dependent on the type of
Internet connection you have. If you are not sure what type of connection you
have, please contact your ISP to obtain the required information, which is listed
in the
Prepare for Installation
section at the beginning of this Quick
Installation Guide.
1.
Open your web browser, type
in the Address bar, and
press
Enter
.
2.
An authentication window will appear. Enter the username and password,
and then click
OK
. By default, the username is “admin”, and the password is
“admin.”
NOTE:
To reset the password on the AP/Router, refer to the User's
Guide CD-ROM.
3.
The “LAN Setting” page will appear.
Click
Wizard
.
Page 7 / 17
5
English
5.
If you want to change your password for your router, then type the new
password in the Password and Verify Password fields. Click
Next
.
6.
Choose the appropriate Time Zone from the pull down menu, and click
Next.
4.
The “Wireless Router Setup Wizard” will appear.
Click
Next
.
Page 8 / 17
English
6
7.
If you want to assign your router to a different network segment, then change
the
LAN IP Address
and
Subnet Mask
.
Make sure that the
Range Start
and
Range End
IP addresses match your network segment.
Otherwise,
click
Next
.
8.
Select your Connection Type from the pull down menu, (Obtain IP
automatically, Fixed IP address, PPPoE, or PPTP) and proceed to the
appropriate subset of instructions below.
9.
Select
Obtain IP automatically (DHCP client)
as the Connection Type and
click
Next
.
10.
Go to step 19.
Obtain IP automatically (DHCP client)
Page 9 / 17
7
English
11.
Select
Fixed IP address
and click
Next
.
12.
Enter the WAN IP Address, WAN Subnet Mask, WAN Gateway Address
and DNS Server provided by your ISP and click
Next.
Fixed IP Address
13.
Go to step 19.
14.
Select
PPPoE to obtain IP automatically
as the Connection Type and
click
Next
.
PPPoE to obtain IP automatically
Page 10 / 17
15.
Enter your username and password. Click
Next
.
17.
Select
PPTP
as the Connection Type and click
Next
.
18.
Enter the IP Address, Subnet Mask, Gateway, Server IP, PPTP Account,
and PPTP Password.
Click
Next
.
16.
Go to step 19.
8
English
PPTP
19216811.live