7
Q4:
A4:
Q5:
A5:
After I successfully configured the Access Point to meet my network settings,
I can not connect to my network using wireless computers.
If you have a DHCP server in your network, you need to go into TCP/IP
settings again and re-select "Obtain an IP address automatically" to allow the PC
to regain an IP address from your DHCP server.
All the settings are correct, but I can not make a wireless connection to the
Access Point.
First, double check that the WLAN light on the Access Point is lit.
Second,
power cycle the Access Point by unplugging the power to the Access Point.
Wait
15 seconds, then plug the power back in.
Third, contact the manufacturer of your
wireless network adapter.
Make sure the wireless network adapter is configured
with the proper SSID.
The default SSID of the Access Point is
TRENDnet.
If you still encounter problems or have any questions regarding the
TEW-430APB,
please contact TRENDnet's Technical Support Department.
Register Your Product
To ensure the highest level of customer service and support, please take a moment to
register your product Online at:
www.trendnet.com/registe
r
Thank you for choosing TRENDnet
19216811.live