Given below is full router user manual of TRENDnet TEG-S2620i router model. You can also download this manual in PDF Format to read later on your computer.
Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.
Page 2 / 10
English
......................................................................................................
Troubleshooting
........................................................................................
1
1
3
2
6
1. Before You Start
2. Hardware Installation
........................................................................
3. Configure the Switch
.........................................................................
................................................................................
Table of Contents
Version 05.08.2008
Page 3 / 10
System Requirements
Optional Equipment
Application
Package Contents
1. Before You Start
English
1
?
?
Multi-Language Quick Installation
Guide
?
User's Guide CD-ROM
?
RS-232 cable
?
Power Cord
?
Rack Mount Kit
TEG-S2620i
?
?
A computer with a network adapter properly installed
?
TCP/IP protocol
?
One RJ-45 network cable
Web Browser: Internet Explorer (5.5 or higher)
?
?
Mini-GBIC module (e.g. TEG-MGBSX, TEG-MGBS10, TEG-MGBS40,
TEG-MGBS80, TEG-MGBS10D3_D5, TEG-MGBS40D3_D5) for Mini
GBIC slots
EIA standard 19” rack
1000Mbps
RS-232 Console
10/100Mbps
Console Terminal
RS-232
8-Port 100Base-FX Layer 2
Managed Switch with Mini GBIC Slot
(TEG-S811Fi)
Virtual LAN
26-Port 10/100Mbps Layer 2 Switch with
Gigabit Ethernet Ports and Mini-GBIC Slots
(TEG-S2620i)
Virtual LAN
Network Servers
Page 4 / 10
2. Hardware Installation
English
2
2.
Connect a RJ-45 network cable
from the computer to an available
Ethernet port on the TEG-S2620i.
3.
Verify that the following panel lights
are on:
POWER
and
LINK/ACT
.
1.
Connect the
Power Cord
to
the TEG-S2620i and then to a
power outlet.
Then press on the
switch to power up the
TEG-S2620i.
Page 5 / 10
English
3
3. Configure the Switch
Note:
It is recommended that you configure the Switch from a wired computer.
Before the Switch can be configured, a Static IP address must be assigned to
your computer's network adapter in the subnet of 192.168.223.x.
Since the
(Refer to
Troubleshooting section on how to configure TCP/IP settings on your PC.)
Web Browser
1.
Open your web browser, type
in the
Address bar, and then press
Enter
.
3.
Select the desired options for
configuring the SNMP switch.
2.
Enter the User Name and
Password, and then click
OK.
By default:
User Name:
admin
Password:
123
19216811.live