TRENDnet TE100-P11 Router Manual PDF (Setup & Configuration Guide)

Page 6 / 12 Scroll up to view Page 1 - 5

English

4

1.

Insert the

Utility CD-ROM

into

your computer's CD-ROM Drive.

2.

Click

Run autorun.exe

(Windows

Vista only).

3. Configure the Print Server

Note:

Disable any anti-virus and firewall programs before starting hardware

installation.

For Windows Users

4.

Click

3.

Click

Setup Wizard

.

Page 7 / 12

Note:

If you have the TE100-P11, skip to step 11. If you have the TEW-P11G,

continue on step 8.

English

5

5.

Select the print server and then

click

6.

If desired, change the

Device

Name

,

Domain Name

and add a

Comment

(optional).

Then click

Name

.

7.

Select the

Obtain IP Address

automatically

and then click

8.

Select the desired wireless

network and click

Page 8 / 12

English

6

10.

If enabled, enter the encryption

key for your wireless network and

then click

This example

shows WPA2-PSK.

9.

The correct wireless settings

should be automatically configured.

Then click

11.

Click

Finish

.

Page 9 / 12

Print Server configuration is now complete.

7

English

For detailed information regarding adding printers for Windows

98SE/ME/2000/XP/2003 Server/Vista, please refer to the User's Guide on the

Utility CD-ROM or TRENDnet's website at www.trendnet.com

13.

Disconnect the RJ-45 cable and

unplug the power.

Then plug the

power back in (TEW-P11G only).

12.

Click

OK

.

Register Your Product

To ensure the highest level of customer service and support, please take a moment to

register your product Online at:

www.trendnet.com/registe

r

Thank you for choosing TRENDnet

Page 10 / 12

8

Troubleshooting

Q1.

A1.

Q2.

A2.

Q3.

A3.

Q4.

A4.

The Setup Wizard is unable to see my printer server.

What should I do?

First, double check your hardware connections; make sure that the print

server is powered

ON

and is properly connected. Second, click

Refresh

.

Third,

disable any software firewall programs (e.g. ZoneAlarm).

If your computer is

running Windows XP or Vista, disable the built in firewall program.

Fourth, unplug

the power to the print server, wait 15 seconds, then plug the power back in.

How do I add a printer to my computer?

Please refer to the User's Guide on the CD-ROM for instructions on adding a

printer.

I configured my print server to automatically receive an IP Address from a

DHCP server but I can't log in to the browser configuration for the print server.

Open the Setup Wizard (See 3. Configure the Print Server) to locate your print

server's IP Address. Then type in the IP address into your browser.

After I successfully configured the TEW-P11G to match my wireless network

settings, I can not connect to the print server.

First, verify that the wireless settings match your wireless network settings.

Second, make sure to disconnect the Ethernet cable from the print server and

verify that the

WIRELESS

LED is lit.

If you still encounter problems or have any questions regarding the

TE100-P11/TEW-

P11G

, please refer to the User's Guide included on the Utility CD-ROM or contact

TRENDnet's Technical Support Department.

Rate

Popular TRENDnet Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share