Page 6 / 19
Scroll up to view Page 1 - 5
1.
Insert the
Utility CD-ROM
into
your computer's CD-ROM Drive
and then click
Install Utility
.
3. Configure the Print Server
2.
Follow the
InstallShield Wizard
instructions.
Then click
Finish
.
3.
Click the Print Server and click
Configure Server
.
4.
Enter the User name and
Password, and then click
Login
.
User Name:
admin
Password:
admin
English
4
Page 7 / 19
Print Server configuration is now complete.
For detailed information regarding the TE100-MP1U/TE100-MP2U
configuration and advanced settings, please refer to the User's Guide on the
Utility CD-ROM or TRENDnet's website at www.trendnet.com
5.
Click
TCP/IP
.
Assign the Print
Server a Static IP address and
then click
Apply
.
Note: The IP Address must match
the same network segment as your
computer.
7.
Cllick
Close
.
6.
Click
Yes
to restart the Print
Server.
Note: For the TEW-MP2U, proceed to section 5.
Register Your Product
To ensure the highest level of customer service and support, please take a moment to
register your product Online at:
www.TRENDnet.com/registe
r
Thank you for choosing TRENDnet
English
5
Page 8 / 19
English
6
4. Configure Wireless Settings (TEW-MP2U only)
1.
Click the Print Server and click
Configure Server
.
2.
Enter the User name and
Password, and then click
Login
.
User Name:
admin
Password:
admin
3.
Click
Wireless
.
Select your
Region or Domain to meet your
country's regulations.
Enter the
SSID of your wireless network.
If
encryption is enabled on your
wireless network, select WEP or
WPA-PSK and enter your
encryption key.
Then click
Apply
.
If you do not know your encryption
key, contact your network
administrator or logon to your
wireless router.
4.
Click
Yes
to restart the Print
Server.
Page 9 / 19
English
7
5.
Cllick
Close
.
7.
Verify the
WLAN
LED is lit on the
Print Server.
6.
Unplug the power to the Print
Server, disconnect the Ethernet
cable to the Print Server, wait 15
seconds, then plug power to the
Print Server back in.
Print Server wireless configuration is now complete.
For detailed information regarding the TEW-MP2U configuration and advanced
settings, please refer to the User's Guide on the Utility CD-ROM or
TRENDnet's website at www.trendnet.com
Register Your Product
To ensure the highest level of customer service and support, please take a moment to
register your product Online at:
www.TRENDnet.com/registe
r
Thank you for choosing TRENDnet
Page 10 / 19
English
8
5. Printing
Note:
1.
For LPR, IPP and Manual connect printing instructions, please refer to the
User Guide.
The User Guide is included on the Utility CD-ROM.
2.
A computer using LPR or IPP printing and a computer using NetUSB printing
can not print documents to the same printer simultaneously.
Setup for Auto Connect Printing
1.
Select the printer.
Click
AutoConnect Printer
and click
Set AutoConnect Printer
2.
Select the desired printer or fax
and click
Apply
.
Note: Only one user can print at a time in Auto Connect mode.
Once a user
has finished printing, another user can print or scan to the printer.
3.
The USB MFP Server Control
Center will now show the printer as
an
AutoConnected Printer
.
19216811.live