Page 6 / 15
Scroll up to view Page 1 - 5
English
4
3. Software Installation (TDM-C400 only)
Note: For Windows 98/98SE applications, you may need the Windows
98/98SE CD ROM to complete the installation.
Before starting the software setup process, close all Windows programs
currently running on your PC.
1.
The system automatically detects
the new hardware when the USB
cable is connected to your PC
Click
Cancel
.
(Windows 98/98SE)
(Windows 2000)
(Windows ME)
(Windows XP)
2.
Insert the installation CD into the
CD drive and click on the USB
Utility button sub menu
"TDM-C400".
The installation
should start.
Page 7 / 15
English
5
3.
The “Welcome!” windows appears.
Exit all Windows programs before
continuing. Then, click on
Next
.
4.
Please review the license
agreement and click Accept to
continue.
5.
The USB Modem Setup Wizard will
begin installing the software and
indicates the progress of the
installation.
6.
If the installation wizard detects
that the ADSL modem is not
connected by USB, it prompts you
to connect it in order to proceed.
Page 8 / 15
7.
A message will be displayed
requiring you to reboot the system.
Select “Yes, reboot the computer
now” and then click
Close
.
9.
From Programs, go to
TRENDnet
DSL Modem
and click on the
DSL
Status.
English
6
8.
After rebooting, the device will be
installed. Please click
Finish
.
10.
The “Physical Link” tab of the
“TRENDnet DSL Modem” window
(Control Panel) allows you to
review the current state of the
TRENDnet DSL Modem and
connection. The State field will
indicate that the TDM-C400 is
“Connected”.
Page 9 / 15
English
7
Note:
The DHCP server of the
ADSL2+ modem router is enabled by default.
Please configure your computer to automatically obtain an IP address from the
ADSL2+ modem router’s DHCP Server.
2.
Enter User name and Password,
and then click
OK
. By default,
User name:
admin
Password:
admin
1.
Open your web browser, type
in the
Address bar, and press
Enter
.
3.
The
System View
page displays
each time you login to the Web-
Configuration. Click
Quick
Configuration
to start
configuration procedures.
4.
Configuring the ADSL Modem through Ethernet
or USB connection
Page 10 / 15
English
8
4.
The Quick Configuration table will
appear requiring you to fill in the
fields with the appropriate
information provided by your
Service Provider.
5.
Then click the Submit button.
6.
Click
Admin
in the Web
Configuration screen.
7.
Click
Commit
& Reboot
.
8.
Click
Commit
.
19216811.live