TP-Link TL-WR841N Router Manual PDF (Setup & Configuration Guide)

Page 106 / 112 Scroll up to view Page 101 - 105

TL-WR841N/TL-WR841ND

300Mbps Wireless N Router User Guide

- 97 -

Appendix B: Configuring the PC

In this section, we’ll introduce how to install and configure the TCP/IP correctly in Windows XP.

First make sure your Ethernet Adapter is working, refer to the adapter’s manual if necessary.

1.

Configure TCP/IP component

1)

On the Windows taskbar, click the

Start

button, and then click

Control Panel

.

2)

Click the

Network and Internet Connections

icon, and then click on the

Network

Connections

tab in the appearing window.

3)

Right click the icon that showed below, select Properties on the prompt page.

Figure B-1

4)

In the prompt page that showed below, double click on the

Internet Protocol (TCP/IP)

.

Page 107 / 112

TL-WR841N/TL-WR841ND

300Mbps Wireless N Router User Guide

- 98 -

Figure B-2

5)

The following

TCP/IP Properties

window will display and the

IP Address

tab is open on

this window by default.

Now you have two ways to configure the

TCP/IP

protocol below:

¾

Setting IP address automatically

Select

Obtain an IP address automatically

, Choose

Obtain DNS server automatically

, as

shown in the Figure below:

Page 108 / 112

TL-WR841N/TL-WR841ND

300Mbps Wireless N Router User Guide

- 99 -

Figure B-3

)

Note:

For Windows 98 OS or before, the PC and Router may need to be restarted.

¾

Setting IP address manually

1

Select

Use the following IP address

radio button. And the following items available

2

If the Router's LAN IP address is 192.168.0.1, specify the

IP address

as 192.168.0.x (x is

from 2 to 254), and the

Subnet mask

as 255.255.255.0.

3

Type the Router’s LAN IP address (the default IP is 192.168.0.1) into the

Default gateway

field.

4

Select

Use the following DNS server addresses

.

In the

Preferred

DNS Server

field you

can enter the same value as the

Default gateway

or type the local DNS server IP address.

Page 109 / 112

TL-WR841N/TL-WR841ND

300Mbps Wireless N Router User Guide

- 100 -

Now click

OK

to keep your settings.

Page 110 / 112

TL-WR841N/TL-WR841ND

300Mbps Wireless N Router User Guide

- 101 -

Appendix C: Specifications

General

Standards

IEEE 802.3, IEEE 802.3u, IEEE 802.11b, IEEE 802.11g and IEEE

802.11n

Protocols

TCP/IP, PPPoE, DHCP, ICMP, NAT, SNTP

Ports

One 10/100M Auto-Negotiation WAN RJ45 port, Four 10/100M

Auto-Negotiation LAN RJ45 ports supporting Auto MDI/MDIX

10BASE-T: UTP category 3, 4, 5 cable (maximum 100m)

EIA/TIA-568 100

Ω

STP (maximum 100m)

Cabling Type

100BASE-TX: UTP category 5, 5e cable (maximum 100m)

EIA/TIA-568 100

Ω

STP (maximum 100m)

LEDs

Power, System, WLAN, WAN, LAN (1-4), WPS

Safety & Emissions

FCC, CE

Wireless

Frequency

Band

2.4~2.4835GHz

Radio Data Rate

11n

：

up to 300Mbps

（

Automatic

）

11g

：

54/48/36/24/18/12/9/6Mbps

（

Automatic

）

11b

：

11/5.5/2/1Mbps

（

Automatic

）

Frequency Expansion

DSSS(Direct Sequence Spread Spectrum)

Modulation

DBPSK, DQPSK, CCK, OFDM, 16-QAM, 64-QAM

Security

WEP/WPA/WPA2/WPA2-PSK/WPA-PSK

Sensitivity @PER

270M: -68dBm@10% PER;

130M: -68dBm@10% PER

108M: -68dBm@10% PER;

54M: -68dBm@10% PER

11M: -85dBm@8% PER;

6M: -88dBm@10% PER

1M: -90dBm@8% PER

Environmental and Physical

Operating : 0

℃

~40

℃

(32

~104

℉

)

Temperature

Storage: -40

℃

~70

℃

(-40

℉

~158

℉

)

Operating: 10% - 90% RH, Non-condensing

Humidity

Storage: 5% - 90% RH, Non-condensing

Rate

Popular TP-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share