1. Home
    2. /
  2. Manuals
    3. /
  3. TP-Link
    4. /
  4. TL-WR841N
    5. /
  5. 20
Page 96 / 112 Scroll up to view Page 91 - 95
TL-WR841N/TL-WR841ND
300Mbps Wireless N Router User Guide
- 87 -
•
Update the configuration with the file (system will reboot automatically.
4.16.7 Password
Choose menu “
System Tools
→
Password
”, you can change the factory default user name and
password of the Router in the next screen as shown in Figure 4-84.
Figure 4-84
Password
It is strongly recommended that you should change the factory default user name and password
of the Router, because all users who try to access the Router's Web-based utility or Quick Setup
will be prompted for the Router's default user name and password.
)
Note:
The new user name and password must not exceed 14 characters in length and not include any
spaces. Enter the new Password twice to confirm.
Click the
Save
button when finished.
Click the
Clear All
button to clear all.
4.16.8 System Log
Choose menu “
System Tools
→
System Log
”, you can view the logs of the Router.
Page 97 / 112
TL-WR841N/TL-WR841ND
300Mbps Wireless N Router User Guide
- 88 -
Figure 4-85
System Log
¾
Auto Mail Feature -
Indicates whether auto mail feature is enabled or not.
¾
Mail Settings -
Set the receiving and sending mailbox address, server address, validation
information as well as the timetable for Auto Mail Feature, as shown in Figure 4-86.
Figure 4-86
Mail Account Settings
Page 98 / 112
TL-WR841N/TL-WR841ND
300Mbps Wireless N Router User Guide
- 89 -
z
From -
Your mail box address. The Router would connect it to send logs.
z
To
-
Recipient’s address. The destination mailbox where the logs would be received.
z
SMTP Server -
Your smtp server. It corresponds with the mailbox filled in the From field.
You can log on the relevant website for Help if you are not clear with the address.
z
Authentication
-
Most SMTP Server requires Authentication. It is required by most
mailboxes that need User Name and Password to log in.
)
Note:
Only when you select
Authentication
, do you have to enter the User Name and
Password in the following fields.
z
User Name -
Your mail account name filled in the From field. The part behind @ is
excluded.
z
Password -
Your mail account password.
z
Confirm The Password -
Enter the password again to confirm.
z
Enable Auto Mail Feature -
Select it to mail logs automatically. You could mail the
current logs either at a specified time everyday or by intervals, but only one could be the
current effective rule. Enter the desired time or intervals in the corresponding field as
shown in Figure 4-86
Click
Save
to keep your settings.
Click
Back
to return to the previous page.
¾
Log Type -
By selecting the log type, only logs of this type will be shown.
¾
Log Level -
By selecting the log level, only logs of this level will be shown.
¾
Refresh -
Refresh the page to show the latest log list.
¾
Save Log -
Click to save all the logs in a txt file.
¾
Mail Log -
Click to send an email of current logs manually according to the address and
validation information set in Mail Settings.
¾
Clear Log -
All the logs will be deleted from the Router permanently, not just from the page.
Click the
Next
button to go to the next page, or click the
Previous
button return to the previous
page.
4.16.9 Statistics
Choose menu “
System Tools
→
Statistics
”, you can view the statistics of the Router, including
total traffic and the value of the last Packets Statistic Interval in seconds.
Page 99 / 112
TL-WR841N/TL-WR841ND
300Mbps Wireless N Router User Guide
- 90 -
Figure 4-87
Statistics
¾
Current Statistics Status -
Enable or Disable. The default value is disabled. To enable, click
the
Enable
button. If disabled, the function of DoS protection in Security settings will
disabled.
¾
Packets Statistics Interval
（
5-60
）
-
The default value is 10. Select a value between 5 and
60 seconds in the drop-down list. The Packets Statistic interval indicates the time section of
the packets statistic.
¾
Sorted Rules –
Choose how displayed statistics are sorted.
Select the
Auto-refresh
checkbox to refresh automatically.
Click the
Refresh
button to refresh immediately.
Click
Reset
All
to reset the values of all the entries to zero.
Click
Delete
All
to delete all entries in the table.
Statistics Table:
IP/MAC Address
The IP and MAC address are displayed with related statistics.
Packets
The total number of packets received and transmitted by the Router.
Total
Bytes
The total number of bytes received and transmitted by the Router.
Packets
The total number of packets received and transmitted in the last
Packets
Statistic interval seconds.
Bytes
The total number of bytes received and transmitted in the last Packets
Statistic interval seconds.
Current
ICMP Tx
The number of the ICMP packets transmitted to WAN per second at the
specified Packets Statistics interval. It is shown like “current transmitting rate
/ Max transmitting rate”.
Page 100 / 112
TL-WR841N/TL-WR841ND
300Mbps Wireless N Router User Guide
- 91 -
UDP Tx
The number of UDP packets transmitted to the WAN per second at the
specified Packets Statistics interval. It is shown like “current transmitting rate
/ Max transmitting rate”.
TCP
SYN Tx
The number of TCP SYN packets transmitted to the WAN per second at the
specified Packets Statistics interval. It is shown like “current transmitting rate
/ Max transmitting rate”.
Reset
Reset the value of he entry to zero.
Modify
Delete
Delete the existing entry in the table.
There would be 5 entries on each page. Click
Previous
to return to the previous page and
Next
to
the next page.

Rate

4 / 5 based on 3 votes.

Popular TP-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top