1. Home
    2. /
  2. Manuals
    3. /
  3. TP-Link
    4. /
  4. TL-WR841N
    5. /
  5. 21
Page 101 / 112 Scroll up to view Page 96 - 100
TL-WR841N/TL-WR841ND
300Mbps Wireless N Router User Guide
- 92 -
Appendix A: FAQ
1.
How do I configure the Router to access Internet by ADSL users?
1)
First, configure the ADSL Modem configured in RFC1483 bridge model.
2)
Connect the Ethernet cable from your ADSL Modem to the WAN port on the Router. The
telephone cord plugs into the Line port of the ADSL Modem.
3)
Log in to the Router, click the “
Network
” menu on the left of your browser, and click
"
WAN
" submenu. On the
WAN
page, select “PPPoE” for WAN Connection Type. Type
user name in the “User Name” field and password in the “Password” field, finish by
clicking
Connect
.
Figure A-1
PPPoE Connection Type
4)
If your ADSL lease is in “pay-according-time” mode, select “Connect on Demand” or
“Connect Manually” for Internet connection mode. Type an appropriate number for “Max
Idle Time” to avoid wasting paid time. Otherwise, you can select “Auto-connecting” for
Internet connection mode.
Figure A-2
PPPoE Connection Mode
)
Note:
1)
Sometimes the connection cannot be disconnected although you specify a time to Max
Idle Time, since some applications is visiting the Internet continually in the background.
2)
If you are a Cable user, please configure the Router following the above steps.
2.
How do I configure the Router to access Internet by Ethernet users?
1)
Log in to the Router, click the “
Network
” menu on the left of your browser, and click
Page 102 / 112
TL-WR841N/TL-WR841ND
300Mbps Wireless N Router User Guide
- 93 -
"
WAN
" submenu. On the
WAN
page, select “Dynamic IP” for "WAN Connection Type",
finish by clicking
Save
.
2)
Some ISPs require that you register the MAC Address of your adapter, which is
connected to your cable/DSL Modem during installation. If your ISP requires MAC
register, log in to the Router and click the "
Network
" menu link on the left of your browser,
and then click "
MAC Clone
" submenu link. On the "
MAC Clone
" page, if your PC’s MAC
address is proper MAC address, click the
Clone MAC Address
button and your PC’s
MAC address will fill in the "WAN MAC Address" field. Or else, type the MAC Address
into the "WAN MAC Address" field. The format for the MAC Address is
XX-XX-XX-XX-XX-XX. Then click the
Save
button. It will take effect after rebooting.
Figure A-3
MAC Clone
3.
I want to use NetMeeting, what do I need to do?
1)
If you start NetMeeting as a sponsor, you don’t need to do anything with the Router.
2)
If you start as a response, you need to configure Virtual Server or DMZ Host and make
sure the H323 ALG is enabled.
3)
How to configure Virtual Server: Log in to the Router, click the “
Forwarding
” menu on
the left of your browser, and click "
Virtual Servers
" submenu. On the "
Virtual Servers
"
page, click
Add New…
. Then on the “
Add or Modify a Virtual Server Entry
” page,
enter “11130” for the “Service Port” blank, and your IP address for the “IP Address” blank,
taking 192.168.0.198 for an example, remember to
Enable
and
Save
.
Figure A-4
Virtual Servers
Page 103 / 112
TL-WR841N/TL-WR841ND
300Mbps Wireless N Router User Guide
- 94 -
Figure A-5
Add or Modify a Virtual server Entry
)
Note:
Your opposite side should call your WAN IP, which is displayed on the “Status” page.
4)
How to enable DMZ Host: Log in to the Router, click the “
Forwarding
” menu on the left
of your browser, and click "
DMZ
" submenu. On the "DMZ" page, click
Enable
radio
button and type your IP address into the “DMZ Host IP Address” field, using
192.168.0.198 as an example, remember to click the
Save
button.
Figure A-6 DMZ
5)
How to enable H323 ALG: Log in to the Router, click the “
Security
” menu on the left of
your browser, and click “
Basic Security
” submenu. On the “
Basic Security
” page,
check the
Enable
radio button next to
H323 ALG
. Remember to click the
Save
button.
Page 104 / 112
TL-WR841N/TL-WR841ND
300Mbps Wireless N Router User Guide
- 95 -
Figure A-7
Basic Security
4.
I want to build a WEB Server on the LAN, what should I do?
1)
Because the WEB Server port 80 will interfere with the WEB management port 80 on the
Router, you must change the WEB management port number to avoid interference.
2)
To change the WEB management port number: Log in to the Router, click the “
Security
”
menu on the left of your browser, and click "
Remote Management
" submenu. On the
"
Remote Management
" page, type a port number except 80, such as 88, into the "Web
Management Port" field. Click
Save
and reboot the Router.
Figure A-8
Remote Management
)
Note:
If the above configuration takes effect, configure to the Router by typing 192.168.0.1:88
(the Router’s LAN IP address: Web Management Port) in the address field of the Web
browser.
3)
Log in to the Router, click the “
Forwarding
” menu on the left of your browser, and click
the "
Virtual Servers
" submenu. On the "
Virtual Servers
" page, click
Add New…
, then
on the “
Add or Modify a Virtual Server
” page, enter “80” into the blank next to the
Page 105 / 112
TL-WR841N/TL-WR841ND
300Mbps Wireless N Router User Guide
- 96 -
“
Service Port
”, and your IP address next to the “
IP Address
”, assuming 192.168.0.188
for an example, remember to
Enable
and
Save
.
Figure A-9
Virtual Servers
Figure A-10
Add or Modify a Virtual server Entry
5.
The wireless stations cannot connect to the Router.
1)
Make sure the "
Enable Wireless Router Radio
" is checked.
2)
Make sure that the wireless stations' SSID accord with the Router's SSID.
3)
Make sure the wireless stations have right KEY for encryption when the Router is
encrypted.
4)
If the wireless connection is ready, but you can’t access the Router, check the IP Address
of your wireless stations.

Rate

4 / 5 based on 3 votes.

Popular TP-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top