Page 116 / 145
Scroll up to view Page 111 - 115
TL-WDR3600
N600 Wireless Dual Band Gigabit Router
- 106 -
Note:
If you want to login again with another account after a successful login, please click the
Logout
button, then input your new username and password and click the
Login
button.
4.19.3 No-ip.com DDNS
If the dynamic DNS
Service Provider
you select is
www.no-ip.com
, the page will appear as
shown in Figure 4-110.
Figure 4-110 No-ip.com DDNS Settings
To set up for DDNS, follow these instructions:
1.
Enter the
User Name
for your DDNS account.
2.
Enter the
Password
for your DDNS account.
3.
Enter the
Domain Name
you received from dynamic DNS service provider.
4.
Click the
Login
button to login to the DDNS service.
Connection Status -
The status of the DDNS service connection is displayed here.
Click
Logout
to log out the DDNS service.
Note:
If you want to login again with another account after a successful login, please click the
Logout
button, then input your new username and password and click the
Login
button.
4.20 IPv6 Support
Page 117 / 145
TL-WDR3600
N600 Wireless Dual Band Gigabit Router
- 107 -
Figure 4-111 IPv6 Support
There are two submenus under the IPv6 Support menu (shown in Figure 4-111):
IPv6 Status
and
IPv6 Setup
. Click either of them, and you will be able to scan or configure the corresponding
function. The detailed explanations for each submenu are provided below.
4.20.1 IPv6 Status
Figure 4-112 IPv6 Status
The
IPv6 Status
page displays the router's current IPv6 status and configuration. All information
is read-only.
WAN
•
Connection Type
- The IPv6 connection way for WAN
•
IPv6 Address
- The WAN IPv6 address
•
IPv6 Default Gateway
- The router's default gateway
•
Primary IPv6 DNS
- The primary IPv6 DNS address
•
Secondary IPv6 DNS
- The secondary IPv6 DNS address
LAN
•
IPv6 Address Assign Type
- There are two types of assignation for IPv6 address:
SLAAC
(Stateless
address
auto-configuration)
and
DHCPv6
(Dynamic
Host
Configuration Protocol for IPv6) Server.
SLAAC
IPv6 Address Prefix
-The Prefix of IPv6 Address
DHCPv6 Server
Release Time
-
the length of time a network user will be allowed to keep connecting to
the router with the current DHCPv6 Address. Enter the amount of time (in seconds) that
the DHCPv6 address will be leased. The time range is 1~691200 seconds. The default
value is 86400 seconds.
Page 118 / 145
TL-WDR3600
N600 Wireless Dual Band Gigabit Router
- 108 -
IPv6 Address
- Displays the LAN IPv6 Address.
4.20.2 IPv6 Setup
Figure 4-113 Enable/Disable IPv6
Enable IPv6
- Tick the checkbox to enable the IPv6 function. It’s enabled by default.
WAN Connection Type
- Choose the correct WAN connection type based on your ISP
network topology.
•
DHCPv6
- Connections which use dynamic IPv6 address assignment.
•
Static IPv6
- Connections which use static IPv6 address assignment.
•
PPPoEv6
- Connections which use PPPoEV6 that requires a user name and password.
•
Tunnel 6to4
- Connections which use 6to4 address assignment.
Different types of WAN connection require you to do different settings. Below are the detailed
explanations for the respective type.
Page 119 / 145
TL-WDR3600
N600 Wireless Dual Band Gigabit Router
- 109 -
1)
DHCPv6
Figure 4-114 DHCPv6
Get non-temporary IPv6 address
- Get a non-temporary IPv6 address from the ISP.
Get IPv6 prefix delegation
- Get a temporary IPv6 address and IPv6 prefix from the ISP, the
temporary IPv6 address is set to the WAN port, and the LAN port advertise IPv6 address by
RADVD or DHCPs.
IPv6 Address
- The IPv6 address assigned by your ISP dynamically.
Click the
Renew
button to renew the IPv6 parameters from your ISP.
Click the
Release
button to release the IPv6 parameters from your ISP.
If your ISP gives you one or two DNS IPv6 addresses, select
Use the following IPv6 DNS
Servers
and enter the
Primary IPv6 DNS
and
Secondary IPv6 DNS
into the correct fields.
Otherwise, the DNS servers will be assigned from ISP dynamically.
Primary IPv6 DNS
- Enter the DNS IPv6 address in dotted-decimal notation provided by your ISP.
Secondary IPv6 DNS
- Enter another DNS IPv6 address in dotted-decimal notation provided
by your ISP.
Page 120 / 145
TL-WDR3600
N600 Wireless Dual Band Gigabit Router
- 110 -
Note:
If you get Address not found error when you access a Web site, it is likely that your DNS servers
are set up improperly. You should contact your ISP to get DNS server addresses.
Get IPv6 with Unicast DHCP
- A few ISPs' DHCP servers do not support the broadcast
applications. If you can't get the IPv6 Address normally, you can choose Unicast. (You
generally need not to check this option).
IPv6 Address Assign Type
- There are two types of assignation for IPv6 address: SLAAC
(Stateless address auto-configuration) and DHCPv6 (Dynamic Host Configuration Protocol
for IPv6) Server.
SLAAC
•
IPv6 Address Prefix
-The Prefix of IPv6 Address
DHCPv6 Server
•
Release Time
-
the length of time a network user will be allowed to keep connecting to the
router with the current DHCPv6 Address. Enter the amount of time (in seconds) that the
DHCPv6 address will be leased. The time range is 1~691200 seconds. The default value
is 86400 seconds.
•
IPv6 Address
- Displays the LAN IPv6 Address.
2)
Static IPv6
Figure 4-115 Static IPv6
19216811.live