TP-Link TL-WDR3600 Router Manual PDF (Setup & Configuration Guide)

Page 96 / 145 Scroll up to view Page 91 - 95

TL-WDR3600

N600 Wireless Dual Band Gigabit Router

- 86 -

2.

Click “

Access Control → Schedule

” on the left to enter the Schedule Settings page. Click

Add New...

button to create a new schedule with Schedule Description is Schedule_1, Day is

Sat and Time is all day-24 hours.

3.

Click “

Parental Control

” menu on the left to go back to the Add or Modify Parental Control

Entry page:

1)

Click

Add New...

button.

2)

Enter 00-11-22-33-44-AA in the

MAC Address of Child PC

field.

3)

Enter “Allow Google” in the

Website Description

field.

4)

Enter “www.google.com” in the

Allowed Domain Name

field.

5)

Select “Schedule_1” you create just now from the

Effective Time

drop-down list.

6)

In

Status

field, select Enable.

4.

Click

Save

to complete the settings.

Then you will go back to the

Parental Control Settings

page and see the following list, as

shown in Figure 4-79.

Figure 4-79 Parental Control Settings

4.15 Access Control

Figure 4-80 Access Control

There are four submenus under the Access Control menu as shown in Figure 4-80:

Rule

,

Host

,

Target

and

Schedule

. Click any of them, and you will be able to configure the corresponding

function.

4.15.1 Rule

Choose menu “

Access Control

→

Rule

”, and then you can view and set Access Control rules in

the screen as shown in Figure 4-81.

Page 97 / 145

TL-WDR3600

N600 Wireless Dual Band Gigabit Router

- 87 -

Figure 4-81 Access Control Rule Management



Enable Internet Access Control -

Select the check box to enable the Internet Access

Control function, so the Default Filter Policy can take effect.



Rule Name -

Here displays the name of the rule and this name is unique.



Host -

Here displays the host selected in the corresponding rule.



Target -

Here displays the target selected in the corresponding rule.



Schedule -

Here displays the schedule selected in the corresponding rule.



Enable -

Here displays the status of the rule, enabled or not. Check this option to enable a

specific entry.



Modify -

Here you can edit or delete an existing rule.



Setup Wizard -

Click the

Setup Wizard

button to create a new rule entry.



Add New... -

Click the

Add New...

button to add a new rule entry.



Enable All -

Click the

Enable All

button to enable all the rules in the list.



Disable All -

Click the

Disable All

button to disable all the rules in the list.



Delete All -

Click the

Delete All

button to delete all the entries in the table.



Move -

You can change the entry’s order as desired. Enter in the first box the ID number of

the entry you want to move and in the second box another ID number, and then click the

Move

button to change the entries’ order.



Next -

Click the



Previous -

Click the

There are two methods to add a new rule.

Page 98 / 145

TL-WDR3600

N600 Wireless Dual Band Gigabit Router

- 88 -

Method One:

1.

Click

Setup Wizard

button and the next screen will appear as shown in Figure 4-82.

Figure 4-82 Quick Setup – Create a Host Entry



Host Description

- In this field, create a unique description for the host (e.g. Host_1).



Mode

- Here are two options,

IP Address

and

MAC Address

. You can select either of them

from the drop-down list.

If the

IP Address

is selected, you can see the following item:



LAN IP Address

- Enter the IP address or address range of the host in dotted-decimal format

(e.g. 192.168.0.23).

If the MAC Address is selected, you can see the following item:



MAC Address

- Enter the MAC address of the host in XX-XX-XX-XX-XX-XX format (e.g.

00-11-22-33-44-AA).

2.

Click

Figure 4-83.

Figure 4-83 Quick Setup – Create an Access Target Entry



Target Description

- In this field, create a description for the target. Note that this description

should be unique (e.g. Target_1).

Page 99 / 145

TL-WDR3600

N600 Wireless Dual Band Gigabit Router

- 89 -



Mode

- Here are two options, IP Address and Domain Name. You can choose either of them

from the drop-down list.

If the

IP Address

is selected, you will see the following items:



IP Address

- Enter the IP address (or address range) of the target (targets) in dotted-decimal

format (e.g. 192.168.0.23).



Target Port

- Specify the port or port range for the target. For some common service ports,

you can make use of the Common Service Port item below.



Protocol

- Here are four options, All, TCP, UDP, and ICMP. Select one of them from the

drop-down list for the target.



Common Service Port

- Here lists some common service ports. Select one from the

drop-down list, and the corresponding port number will be filled in the Target Port field

automatically. For example, if you select "FTP", "21" will be filled in the Target Port

automatically.

If the

Domain Name

is selected, you will see the following items:



Domain Name

- Here you can enter 4 domain names, either the full name or the keywords

(for example, google). Any domain name with keywords in it (www.google.com,

www.google.cn) will be blocked or allowed.

3.

Click

shown in Figure 4-84.

Figure 4-84 Quick Setup – Create an Advanced Schedule Entry



Schedule Description

- In this field, create a description for the schedule. Note that this

description should be unique (e.g. Schedule_1).



Day

- Choose Select Days and select the certain day (days), or choose Everyday.



Time

- Select "24 hours", or specify the Start Time and Stop Time yourself.

Page 100 / 145

TL-WDR3600

N600 Wireless Dual Band Gigabit Router

- 90 -



Start Time

- Enter the start time in HHMM format (HHMM are 4 numbers). For example 0800

is 8:00.



Stop Time

- Enter the stop time in HHMM format (HHMM are 4 numbers). For example 2000

is 20:00.

4.

Click

appear as shown in Figure 4-85.

Figure 4-85 Quick Setup – Create an Internet Access Control Entry



Rule

- In this field, create a name for the rule. Note that this name should be unique (e.g.

Rule_1).



Host

- In this field, select a host from the drop-down list for the rule. The default value is the

Host Description

you set just now.



Target

- In this filed, select a target from the drop-down list for the rule. The default value is

the

Target Description

you set just now.



Schedule

- In this field, select a schedule from the drop-down list for the rule. The default

value is the

Schedule Description

you set just now.



Status

- In this field, there are two options,

Enable

or

Disable

. Select

Enable

so that the rule

will take effect. Select

Disable

so that the rule won't take effect.

5.

Click

Finish

to complete adding a new rule.

Method Two:

1.

Click the

Add New…

button and the next screen will pop up as shown in Figure 4-86.

2.

Give a name (e.g. Rule_1) for the rule in the

Rule Name

field.

3.

Select a host from the

Host

drop-down list or choose “

Click Here To Add New Host List

”.

4.

Select a target from the

Target

drop-sown list or choose “

Click Here To Add New Target

List

”.

Rate

Popular TP-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share