1. Home
    2. /
  2. Manuals
    3. /
  3. TP-Link
    4. /
  4. TL-WDR3600
    5. /
  5. 21
Page 101 / 145 Scroll up to view Page 96 - 100
TL-WDR3600
N600 Wireless Dual Band Gigabit Router
- 91 -
5.
Select a schedule from the
Schedule
drop-down list or choose “
Click Here To Add New
Schedule
”.
6.
In the
Status
field, select
Enabled
or
Disabled
to enable or disable your entry.
7.
Click the
Save
button.
Figure 4-86 Add Internet Access Control Entry
For example
: If you desire to allow the host with MAC address 00-11-22-33-44-AA to access
www.google.com only from 18:00 to 20:00 on Saturday and Sunday, and forbid other hosts in the
LAN to access the Internet, you should follow the settings below:
1.
Click the submenu
Rule of Access Control
in the left to return to the Rule List page. Select
Enable Internet Access Control and choose "Allow the packets specified by any enabled
access control policy to pass through the Router".
2.
We recommend that you click
Setup Wizard
button to finish all the following settings.
3.
Click the submenu
Host of Access Control
in the left to enter the Host List page. Add a new
entry with the Host Description is Host_1 and MAC Address is 00-11-22-33-44-AA.
4.
Click the submenu
Target of Access Control
in the left to enter the Target List page. Add a
new entry with the Target Description is Target_1 and Domain Name is www.google.com.
5.
Click the submenu
Schedule of Access Control
in the left to enter the Schedule List page.
Add a new entry with the Schedule Description is Schedule_1, Day is Sat and Sun, Start
Time is 1800 and Stop Time is 2000.
6.
Click the submenu
Rule of Access Control
in the left, Click
Add New...
button to add a new
rule as follows:
1)
In Rule Name field, create a name for the rule. Note that this name should be unique, for
example Rule_1.
2)
In Host field, select Host_1.
3)
In Target field, select Target_1.
Page 102 / 145
TL-WDR3600
N600 Wireless Dual Band Gigabit Router
- 92 -
4)
In Schedule field, select Schedule_1.
5)
In Status field, select Enable.
6)
Click Save to complete the settings.
Then you will go back to the Access Control Rule Management page and see the following list.
4.15.2 Host
Choose menu “
Access Control
→
Host
”, and then you can view and set a Host list in the
screen as shown in Figure 4-87. The host list is necessary for the Access Control Rule.
Figure 4-87 Host Settings
Host Description -
Here displays the description of the host and this description is unique.
Information -
Here displays the information about the host. It can be IP or MAC.
Modify -
To modify or delete an existing entry.
To add a new entry, please follow the steps below.
1.
Click the
Add New…
button.
2.
In the
Mode
field, select IP Address or MAC Address.
1)
If you select IP Address, the screen shown is Figure 4-88.
In
Host Description
field, create a unique description for the host (e.g. Host_1).
In
LAN IP Address
field, enter the IP address.
2)
If you select MAC Address, the screen shown is Figure 4-89.
In
Host Description
field, create a unique description for the host (e.g. Host_1).
In
MAC Address
field, enter the MAC address.
3.
Click the
Save
button to complete the settings.
Click the
Delete All
button to delete all the entries in the table.
Page 103 / 145
TL-WDR3600
N600 Wireless Dual Band Gigabit Router
- 93 -
Click the
Next
button to go to the next page, or click the
Previous
button to return to the previous
page.
Figure 4-88 Add or Modify a Host Entry
Figure 4-89 Add or Modify a Host Entry
For example
: If you desire to restrict the internet activities of host with MAC address
00-11-22-33-44-AA, you should first follow the settings below:
1.
Click
Add New...
button in Figure 4-87 to enter the Add or Modify a Host Entry page.
2.
In
Mode
field, select MAC Address from the drop-down list.
3.
In
Host Description
field, create a
unique
description for the host (e.g. Host_1).
4.
In
MAC Address
field, enter 00-11-22-33-44-AA.
5.
Click
Save
to complete the settings.
Then you will go back to the Host Settings page and see the following list.
4.15.3 Target
Choose menu “
Access Control
→
Target
”, and then you can view and set a Target list in the
screen as shown in Figure 4-90. The target list is necessary for the Access Control Rule.
Page 104 / 145
TL-WDR3600
N600 Wireless Dual Band Gigabit Router
- 94 -
Figure 4-90 Target Settings
Target Description -
Here displays the description about the target and this description is
unique.
Information -
The target can be IP address, port, or domain name.
Modify -
To modify or delete an existing entry.
To add a new entry, please follow the steps below.
1.
Click the
Add New…
button.
2.
In Mode field, select
IP Address
or
Domain Name
.
3.
If you select
IP Address
, the screen shown is Figure 4-91.
Figure 4-91 Add or Modify an Access Target Entry
1)
In
Target Description
field, create a unique description for the target (e.g. Target_1).
2)
In
IP Address
field, enter the IP address of the target.
3)
Select a common service from
Common Service Port
drop-down list, so that the
Target
Port
will be automatically filled. If the
Common Service Port
drop-down list doesn’t
have the service you want, specify the
Target Port
manually.
4)
In
Protocol
field, select TCP, UDP, ICMP or ALL from the drop-down list.
4.
If you select
Domain Name
, the screen shown is Figure 4-92.
Page 105 / 145
TL-WDR3600
N600 Wireless Dual Band Gigabit Router
- 95 -
Figure 4-92 Add or Modify an Access Target Entry
1)
In
Target Description
field, create a unique description for the target (e.g. Target_1).
2)
In
Domain Name
field, enter the domain name, either the full name or the keywords (for
example, google) in the blank. Any domain name with keywords in it (www.google.com,
www.google.cn) will be blocked or allowed. You can enter 4 domain names.
5.
Click the
Save
button.
Click the
Delete All
button to delete all the entries in the table.
Click the
Next
button to go to the next page, or click the
Previous
button to return to the previous
page.
For example
: If you desire to restrict the internet activities of host with MAC address
00-11-22-33-44-AA in the LAN to access
www.google.com
only, you should first follow the
settings below:
1.
Click
Add New…
button in Figure 4-90 to enter the Add or Modify an Access Target Entry
page.
2.
In
Mode
field, select Domain Name from the drop-down list.
3.
In
Target Description
field, create a unique description for the target (e.g. Target_1).
4.
In
Domain Name
field, enter www.google.com.
5.
Click
Save
to complete the settings.
Then you will go back to the Target Settings page and see the following list.
4.15.4 Schedule
Choose menu “
Access Control
→
Schedule
”, and then you can view and set a Schedule list in
the next screen as shown in Figure 4-93. The Schedule list is necessary for the Access Control
Rule.

Rate

4 / 5 based on 1 vote.

Popular TP-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top