TP-Link TL-MR3240 Router Manual PDF (Setup & Configuration Guide)

Page 36 / 122 Scroll up to view Page 31 - 35

TL-MR3220

3G/3.75G Wireless Lite N Router

-29-

¾

Set the Dial Number and APN

manually -

Check the box and fill the Dial Number and

APN blanks below if your ISP is not listed in the

Mobile ISP

list or the default values are not

the latest ones.

¾

Dial Number

-

Enter the Dial Number provided by your ISP.

¾

APN

-

Enter the APN (Access Point Name) provided by your ISP.

¾

Username/Password

-

Enter the Username and Password provided by your ISP. These

fields are case-sensitive.

Click the

Connect

button to connect to your 3G network. Once the connection is successful,

you will find the 3G screen is similar to Figure 4-8. Click menu

Status

and you will see the 3G

status is similar to Figure 4-9.

Downloaded from

www.Manualslib.com

manuals search engine

Page 37 / 122

TL-MR3220

3G/3.75G Wireless Lite N Router

-30-

Figure 4-8

Downloaded from

www.Manualslib.com

manuals search engine

Page 38 / 122

TL-MR3220

3G/3.75G Wireless Lite N Router

-31-

Figure 4-9

¾

Connect on Demand

-

You can configure the Router to disconnect your Internet

connection after a specified period of the Internet connectivity (

Max Idle Time

). If your

Internet connection has been terminated due to inactivity,

Connect on Demand

enables

the Router to automatically re-establish your connection as soon as you attempt to access

the Internet again. If you wish to activate

Connect on Demand

, click the radio button. If you

want your Internet connection to remain active at all times, enter

0

in the

Max Idle Time

field. Otherwise, enter the number of minutes you want to have elapsed before your Internet

connection terminates.

)

Note:

Sometimes the connection cannot be disconnected although you specify a time to

Max Idle

Time

because some applications visit the Internet continually in the background.

¾

Connect Automatically

-

Connect automatically after the Router is disconnected. To use

this option, click the radio button.

¾

Connect Manually

-

You can configure the Router to make it connect or disconnect

manually. After a specified period of inactivity (

Max Idle Time

), the Router will disconnect

your Internet connection, and not be able to re-establish your connection automatically as

soon as you attempt to access the Internet again. To use this option, click the radio button.

If you want your Internet connection to remain active at all times, enter

0

in the

Max Idle

Time

field. Otherwise, enter the number in minutes that you wish to have the Internet

connecting last unless a new link requested.

)

Note:

Sometimes the connection cannot be disconnected although you specify a time to

Max Idle

Time

because some applications visit the Internet continually in the background.

Downloaded from

www.Manualslib.com

manuals search engine

Page 39 / 122

TL-MR3220

3G/3.75G Wireless Lite N Router

-32-

¾

MTU Size

-

The default MTU (Maximum Transmission Unit) size is 1480 bytes, which is

usually fine. For some ISPs, you need modify the MTU. This should not be done unless you

are sure it is necessary for your ISP.

¾

Use the following DNS Servers -

If your ISP specifies a DNS server IP address for you,

click the checkbox, and fill the

Primary DNS

and

Secondary DNS

blanks below. The

Secondary DNS is optional. Otherwise, the DNS servers will be assigned dynamically from

ISP.

¾

Primary DNS

-

Enter the DNS IP address in dotted-decimal notation provided by your ISP.

¾

Secondary DNS

-

(Optional) Enter another DNS IP address in dotted-decimal notation

provided by your ISP.

Click the

Save

button to save your settings.

Click the

Modem Settings

button if your 3G USB Modem is not supported by the Router, and

then you will see the screen as shown in Figure 4-10. Parameters of your USB modem can be

configured on this page.

Figure 4-10

3G USB Modem Settings

There are already much 3G USB modem information embedded in the router. The USB modem

parameters will be set automatically if the card is supported by the router. But when the router

finds the card you just insert "unknown" to it, it will prompt you to set these parameters. The

router can identify your "unknown" card if the correct parameters are in the list. We suggest you

to do the “3G USB Modem Setting” only in such circumstance.

To add 3G USB Modem entries, follow the steps below.

1. Download a most recent 3G USB modem configuration file from our website

(http://www.tp-link.com).

2. Click the

Add New...

button in Figure 4-10, and then you will see Figure 4-11.

3. Click

Browse…

to select the path name where you save the downloaded file on the

computer into the File blank.

Downloaded from

www.Manualslib.com

manuals search engine

Page 40 / 122

TL-MR3220

3G/3.75G Wireless Lite N Router

-33-

4. Click the

Upload

button to upload the configuration.

Figure 4-11

Add or Modify a 3G USB Modem Entry

4.5.3 WAN

Choose menu “

Network

→

WAN

”, you can configure the IP parameters of the WAN on the

screen below.

)

Note:

WAN settings are unavailable when the Internet Access mode is set to 3G Only mode. Please

change settings on

4.5.1 Internet Access

if you want to use WAN.

1.

If your ISP provides the DHCP service, please choose

Dynamic IP

type,

and the Router

will automatically get IP parameters from your ISP. You can see the page as follows

(Figure 4-12):

Downloaded from

www.Manualslib.com

manuals search engine

Rate

Popular TP-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share