1. Home
    2. /
  2. Manuals
    3. /
  3. TP-Link
    4. /
  4. TL-MR3240
    5. /
  5. 4
Page 16 / 122 Scroll up to view Page 11 - 15
TL-MR3220
3G/3.75G Wireless Lite N Router
-9-
Figure 3-1
Success result of Ping command
¾
If the result displayed is similar to the Figure 3-2
,
it means the connection between your PC
and the Router is failed.
Figure 3-2
Failure result of Ping command
Please check the connection following these steps:
1.
Is the connection between your PC and the Router correct?
)
Note:
The 1/2/3/4 LEDs of LAN ports which you link to on the Router and LEDs on your PC's adapter
should be lit.
Downloaded from
www.Manualslib.com
manuals search engine
Page 17 / 122
TL-MR3220
3G/3.75G Wireless Lite N Router
-10-
2.
Is the TCP/IP configuration for your PC correct?
)
Note:
If the Router's IP address is 192.168.1.1, your PC's IP address must be within the range of
192.168.1.2 ~ 192.168.1.254.
3.2
Quick Installation Guide
With a Web-based (Internet Explorer or Netscape
®
Navigator) utility, it is easy to configure and
manage the 3G/3.75G Wireless Lite N Router. The Web-based utility can be used on any
Windows, Macintosh or UNIX OS with a Web browser.
1.
To access the configuration utility, open a web-browser and type in the default address
in the address field of the browser.
Figure 3-3
Login the Router
After a moment, a login window will appear, similar to the Figure 3-4. Enter
admin
for the User
Name and Password, both in lower case letters. Then click the
OK
button or press the
Enter
key.
Figure 3-4
Login Windows
)
Note:
If the above screen does not pop-up, it means that your Web-browser has been set to a proxy.
Go to Tools menu>Internet Options>Connections>LAN Settings, in the screen that appears,
cancel the Using Proxy checkbox, and click
OK
to finish it.
2.
After successfully login, you can click the
Quick Setup
to quickly configure your Router.
Downloaded from
www.Manualslib.com
manuals search engine
Page 18 / 122
TL-MR3220
3G/3.75G Wireless Lite N Router
-11-
Figure 3-5
Quick Setup
3.
Click
Next
, and then
Internet Access
page will appear, shown in Figure 3-6. Select a
desired Internet access mode and then click
Next
. The configuration for each mode is
similar. Here we take 3
G Preferred
mode for example.
Figure 3-6
Choose Internet Access Mode
¾
3G Preferred
In this mode, the router will try 3G access first. If 3G access fails and WAN access is valid,
or if no 3G USB modem is inserted, the router would switch to WAN access. Once the
router succeeds to connect to the 3G network, the router would stop the WAN connection
and switch back to 3G access immediately.
¾
3G Only
In this mode, the router will try 3G access only. WAN access is disabled.
¾
WAN Preferred
In this mode, the router will try WAN access first. If the WAN access fails, and 3G access is
valid, the router would switch to 3G access. Once the router succeeds to connect to the
Downloaded from
www.Manualslib.com
manuals search engine
Page 19 / 122
TL-MR3220
3G/3.75G Wireless Lite N Router
-12-
WAN network, the router would stop the 3G connection and switch back to WAN access
immediately.
¾
WAN Only
In this mode, the router will try WAN access only. 3G access is disabled.
4.
The next screen will appear as shown in Figure 3-7. After finishing the configuration on this
page, click
Next
to continue,
Figure 3-7
¾
Location -
Select the location where you're enjoying the 3G card.
¾
Mobile ISP -
Select the ISP (Internet Service Provider) you apply to for 3G service. The
router will show the default Dial Number and APN of that ISP. If your ISP is not listed in the
Mobile ISP
, check the box before
Set the Dial Number and APN
manually
and fill the Dial
Number and APN blanks below.
¾
Dial Number & APN -
Fill these two parameters manually after
Set the Dial Number and
APN manually
is checked.
¾
Username & Password -
Enter the Username and Password provided by your ISP. These
fields are optional but case-sensitive.
5.
You will then see Figure 3-8. Select
Auto-Detect
, the Router will automatically detect the
connection type your ISP provides. Make sure the cable is securely plugged into the WAN
port before detection. The appropriate configuration page will be displayed when an active
Downloaded from
www.Manualslib.com
manuals search engine
Page 20 / 122
TL-MR3220
3G/3.75G Wireless Lite N Router
-13-
Internet service is successfully detected by the Router.
Figure 3-8
¾
If the connection type detected is
PPPoE
, the next screen will appear as shown in Figure 3-9.
Enter the
User Name
and
Password
provided by your ISP. These fields are case sensitive. If
you have difficulty with this process, please contact your ISP.
Figure 3-9
Quick Setup – PPPoE
¾
If the connection type detected is Dynamic IP, the next screen will appear as shown in Figure
3-11. Then you can go on with the wireless configuration.
¾
If the connection type detected is Static IP, the next screen will appear as shown in Figure
3-10. Enter the parameters in the corresponding blanks.
Downloaded from
www.Manualslib.com
manuals search engine

Rate

4.5 / 5 based on 2 votes.

Popular TP-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top