19216811.liveTL-MR3220
3G/3.75G Wireless Lite N Router
-39-
¾
User Name/Password -
Enter the User Name and Password provided by your ISP. These
fields are case-sensitive.
¾
Auth Server -
Enter the authenticating server IP address or host name.
¾
Auth Domain -
Type in the domain suffix server name based on your location.
e.g.
NSW / ACT -
nsw.bigpond.net.au
VIC / TAS / WA / SA / NT -
vic.bigpond.net.au
QLD -
qld.bigpond.net.au
¾
MTU Size -
The normal
MTU
(Maximum Transmission Unit) value for most Ethernet
networks is 1500 Bytes. It is not recommended that you change the default
MTU Size
unless required by your ISP.
¾
Connect on Demand -
In this mode, the Internet connection can be terminated
automatically after a specified inactivity period (
Max Idle Time
) and
be
re-established
when you attempt to access the Internet again.
If you want your Internet connection keeps
active all the time, please enter “0” in the
Max Idle Time
field.
Otherwise, enter the number
of minutes you want to have elapsed before your Internet access disconnects.
¾
Connect Automatically -
The connection can be re-established automatically when it was
down.
¾
Connect Manually -
You can click the
Connect
/
Disconnect
button to connect/disconnect
immediately.
This mode also supports the
Max Idle Time
function as
Connect on Demand
mode. The Internet connection can be disconnected automatically after a specified
inactivity period and
re-established when you attempt to access the Internet again.
Click the
Connect
button to connect immediately. Click the
Disconnect
button to
disconnect immediately.
Caution
: Sometimes the connection cannot be terminated although you specify a time to Max
Idle Time because some applications are visiting the Internet continually in the background.
Click the
Save
button to save your settings.
5.
If your ISP provides L2TP connection, please select
L2TP
option. And you should enter
the following parameters (Figure 4-17):
Downloaded from
www.Manualslib.com
manuals search engine