TP-Link TL-MR3220 Router Manual PDF (Setup & Configuration Guide)

Page 86 / 109 Scroll up to view Page 81 - 85

TL-MR3220

3G/4G Wireless N Router User Guide

-77-

To set up for DDNS, follow these instructions:

1.

Type the

User Name

for your DDNS account.

2.

Type the

Password

for your DDNS account.

3.

Type the

Domain Name

you received from dynamic DNS service provider here.

4.

Click the

Login

button to log in to the DDNS service.

Connection Status -

The status of the DDNS service connection is displayed here.

Click

Logout

to logout of the DDNS service.

4.15.3 No-ip.com DDNS

If the dynamic DNS

Service Provider

you select is

www.no-ip.com

, the page will appear as

shown in Figure 4-75.

Figure 4-75 No-ip.com DDNS Settings

To set up for DDNS, follow these instructions:

1.

Type the

User Name

for your DDNS account.

2.

Type the

Password

for your DDNS account.

3.

Type the

Domain Name

you received from dynamic DNS service provider.

4.

Click the

Login

button to log in the DDNS service.

Connection Status -

The status of the DDNS service connection is displayed here.

Click

Logout

to log out the DDNS service.

Page 87 / 109

TL-MR3220

3G/4G Wireless N Router User Guide

-78-

4.16 System Tools

Figure 4-76 The System Tools menu

Choose menu “

System Tools

”, and you can see the submenus under the main menu:

Time

Settings

,

Diagnostic

,

Firmware Upgrade

,

Factory Defaults, Backup & Restore

,

Reboot

,

Password

,

System Log

and

Statistics

.

Click any of them, and you will be able to configure the

corresponding function. The detailed explanations for each submenu are provided below.

4.16.1 Time Settings

Choose menu “

System Tools

→

Time Settings

”, you can configure the time on the following

screen.

Figure 4-77

Time settings

¾

Time Zone -

Select your local time zone from this pull down list.

¾

Date -

Enter your local date in MM/DD/YY into the right blanks.

¾

Time -

Enter your local time in HH/MM/SS into the right blanks.

Page 88 / 109

TL-MR3220

3G/4G Wireless N Router User Guide

-79-

¾

NTP Server I/II -

Enter the address for the NTP Server, then the Router will get the time

from the NTP Server preferentially. In addition, the Router built-in some common NTP

Servers, so it can get time automatically once it connects the Internet.

To configure the system manually:

1.

Select your local

time zone

.

2.

Enter

date

and

time

in the right blanks.

3.

Click

Save

to save the configuration.

To configure the system automatically:

1.

Select your local

time zone

.

2.

Enter the IP address for

NTP Server I

or

NTP Server II

.

3.

Click the

Get GMT

button to get system time from Internet if you have connected to the

Internet.

)

Note:

1)

This setting will be used for some time-based functions such as firewall. You must specify

your time zone once you login to the Router successfully; otherwise, these functions will not

take effect.

2)

The time will be lost if the Router is turned off.

3)

The Router will obtain GMT automatically from Internet if it has already connected to

Internet.

4.16.2 Diagnostic

Choose menu “

System Tools

→

Diagnostic

”, you can transact Ping or Traceroute function to

check connectivity of your network in the following screen.

Page 89 / 109

TL-MR3220

3G/4G Wireless N Router User Guide

-80-

Figure 4-78

Diagnostic Tools

¾

Diagnostic Tool -

Check the radio button to select one diagnostic too.

z

Ping -

This diagnostic tool troubleshoots connectivity, reachability, and name resolution

to a given host or gateway.

z

Traceroute -

This diagnostic tool tests the performance of a connection.

)

Note:

You can use ping/traceroute to test both numeric IP address or domain name. If

pinging/tracerouting the IP address is successful, but pinging/tracerouting the domain

name is not, you might have a name resolution problem. In this case, ensure that the

domain name you are specifying can be resolved by using Domain Name System (DNS)

queries.

¾

IP Address/Domain Name -

Type the destination IP address (such as 202.108.22.5) or

Domain name (such as http://www.tp-link.com)

¾

Pings Count -

The number of Ping packets for a Ping connection.

¾

Ping Packet Size -

The size of Ping packet.

¾

Ping Timeout -

Set the waiting time for the reply of each Ping packet. If there is no reply in

the specified time, the connection is overtime.

¾

Traceroute Max TTL -

The max number of hops for a Traceroute connection.

Click

Start

to check the connectivity of the Internet.

The

Diagnostic Results

page displays the result of diagnosis.

If the result is similar to the following screen, the connectivity of the Internet is fine.

Page 90 / 109

TL-MR3220

3G/4G Wireless N Router User Guide

-81-

Figure 4-79

Diagnostic Results

)

Note:

Only one user can use this tool at one time. Options “Number of Pings”, “Ping Size” and “Ping

Timeout” are used for

Ping

function. Option “Tracert Hops” are used for

Tracert

function.

4.16.3 Firmware Upgrade

Choose menu “

System Tools

→

Firmware Upgrade

”, you can update the latest version of

firmware for the Router on the following screen.

Figure 4-80

Firmware Upgrade

¾

Firmware Version

-

This displays the current firmware version.

¾

Hardware Version

-

This displays the current hardware version. The hardware version of

the upgrade file must accord with the Router’s current hardware version.

To upgrade the Router's firmware, follow these instructions below:

1. Download

a

more

recent

firmware

upgrade

file

from

the

TP-LINK

website

(http://www.tp-link.com).

2. Type the path and file name of the update file into the

File

field. Or click the

Browse…

button to locate the update file.

3. Click the

Upgrade

button.

Rate

Popular TP-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share