TP-Link TL-MR3220 Router Manual PDF (Setup & Configuration Guide)

Page 71 / 109 Scroll up to view Page 66 - 70

TL-MR3220

3G/4G Wireless N Router User Guide

-62-

3. Click “

Parental Control

” menu on the left to go back to the Add or Modify Parental Control

Entry page:

z

Click

Add New...

button.

z

Enter 00-11-22-33-44-AA in the

MAC Address of Child PC

field.

z

Enter “Allow Google” in the

Website Description

field.

z

Enter “www.google.com” in the

Allowed Domain Name

field.

z

Select “Schedule_1” you create just now from the

Effective Time

drop-down list.

z

In

Status

field, select Enable.

4. Click

Save

to complete the settings.

Then you will go back to the Parental Control Settings page and see the following list, as

shown in Figure 4-48.

Figure 4-48

Parental Control Settings

4.11 Access Control

Figure 4-49 Access Control

There are four submenus under the Access Control menu as shown in Figure 4-49:

Rule

,

Host

,

Target

and

Schedule

. Click any of them, and you will be able to configure the corresponding

function.

Page 72 / 109

TL-MR3220

3G/4G Wireless N Router User Guide

-63-

4.11.1 Rule

Choose menu “

Access Control

→

Rule

”, you can view and set Access Control rules in the

screen as shown in Figure 4-50.

Figure 4-50

Access Control Rule Management

¾

Enable Internet Access Control -

Select the check box to enable the Internet Access

Control function, so the Default Filter Policy can take effect.

¾

Rule Name -

Here displays the name of the rule and this name is unique.

¾

Host -

Here displays the host selected in the corresponding rule.

¾

Target -

Here displays the target selected in the corresponding rule.

¾

Schedule -

Here displays the schedule selected in the corresponding rule.

¾

Modify -

Here you can edit or delete an existing rule.

Click the

Enable All

button to enable all the rules in the list.

Click the

Disable All

button to disable all the rules in the list.

Click the

Delete All

button to delete all the entries in the table.

You can change the entry’s order as desired. Fore entries are before hind entries. Enter the ID

number in the first box you want to move and another ID number in second box you want to

move to, and then click the

Move

button to change the entry’s order.

Click the

page.

To add a new rule, please follow the steps below.

1. Click the

Add New…

button and the next screen will pop-up as shown in Figure 4-51.

2.

Give a name (e.g. Rule_1) for the rule in the

Rule Name

field.

Page 73 / 109

TL-MR3220

3G/4G Wireless N Router User Guide

-64-

3.

Select a host from the

Host

drop-down list or choose “

Click Here To Add New Host List

”.

4.

Select a target from the

Target

drop-sown list or choose “

Click Here To Add New Target

List

”.

5. Select a schedule from the

Schedule

drop-down list or choose “

Click Here To Add New

Schedule

”.

6. In the

Status

field, select

Enabled

or

Disabled

to enable or disable your entry.

7. Click the

Save

button.

Figure 4-51

Add or Modify Internet Access Control Entry

For example

: If you desire to allow the host with MAC address 00-11-22-33-44-AA to access

www.google.com

only from

18:00

to

20:00

on

Saturday and Sunday

, and forbid other hosts

in the LAN to access the Internet, you should follow the settings below:

1. Click “

Access Control

→

Host

” in the left to enter the Host Settings page. Add a new

entry with the Host Description is Host_1 and MAC Address is 00-11-22-33-44-AA.

2. Click “

Access Control

→

Target

” in the left to enter the Target Settings page. Add a new

entry with the Target Description is Target_1 and Domain Name is www.google.com.

3. Click “

Access Control

→

Schedule

” in the left to enter the Schedule Settings page. Add a

new entry with the Schedule Description is Schedule_1, Day is Sat and Sun, Start Time is

1800 and Stop Time is 2000.

4. Click “

Access Control

→

Rule

” in the left to return to the Access Control Rule

Management page. Select “

Enable Internet Access Control

” and choose "Deny the

packets not specified by any access control policy to pass through the Router".

5. Click

Add New...

button to add a new rule as follows:

z

In

Rule Name

field, create a name for the rule. Note that this name should be unique,

for example Rule_1.

z

In

Host

field, select Host_1.

z

In

Target

field, select Target_1.

z

In

Schedule

field, select Schedule_1.

z

In

Action

field, select Allow.

z

In

Status

field, select Enable.

z

Click

Save

to complete the settings.

Then you will go back to the Access Control Rule Management page and see the following list.

Page 74 / 109

TL-MR3220

3G/4G Wireless N Router User Guide

-65-

4.11.2 Host

Choose menu “

Access Control

→

Host

”, you can view and set a Host list in the screen as

shown in Figure 4-52. The host list is necessary for the Access Control Rule.

Figure 4-52

Host Settings

¾

Host Description -

Here displays the description of the host and this description is unique.

¾

Information -

Here displays the information about the host. It can be IP or MAC.

¾

Modify -

To modify or delete an existing entry.

Click the

Delete All

button to delete all the entries in the table.

Click the

To add a new entry, please follow the steps below.

1.

Click the

Add New…

button.

2.

In the

Mode

field, select IP Address or MAC Address.

z

If you select IP Address, the screen shown is Figure 4-53.

1) In

Host Description

field, create a unique description for the host (e.g. Host_1).

2) In

LAN IP Address

field, enter the IP address.

z

If you select MAC Address, the screen shown is Figure 4-54.

1) In

Host Description

field, create a unique description for the host (e.g. Host_1).

2) In

MAC Address

field, enter the MAC address.

3.

Click the

Save

button to complete the settings.

Figure 4-53

Add or Modify a Host Entry

Page 75 / 109

TL-MR3220

3G/4G Wireless N Router User Guide

-66-

Figure 4-54

Add or Modify a Host Entry

For example

: If you desire to restrict the internet activities of host with MAC address

00-11-22-33-44-AA, you should first follow the settings below:

1. Click

Add New...

button in Figure 4-52 to enter the Add or Modify a Host Entry page.

2. In

Mode

field, select

MAC Address

from the drop-down list.

3. In

Host Description

field, create a unique description for the host (e.g. Host_1).

4. In

MAC Address

field, enter 00-11-22-33-44-AA.

5. Click

Save

to complete the settings.

Then you will go back to the Host Settings page and see the following list.

4.11.3 Target

Choose menu “

Access Control

→

Target

”, you can view and set a Target list in the screen as

shown in Figure 4-55. The target list is necessary for the Access Control Rule.

Figure 4-55

Target Settings

¾

Target Description -

Here displays the description about the target and this description is

unique.

¾

Information -

The target can be IP address, port, or domain name.

¾

Modify -

To modify or delete an existing entry.

Click the

Delete All

button to delete all the entries in the table.

Click the

To add a new entry, please follow the steps below.

1.

Click the

Add New…

button.

Rate

Popular TP-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share