1. Home
    2. /
  2. Manuals
    3. /
  3. TP-Link
    4. /
  4. TL-MR3220
    5. /
  5. 20
Page 96 / 109 Scroll up to view Page 91 - 95
TL-MR3220
3G/4G Wireless N Router User Guide
-87-
Statistics Table:
IP/MAC Address
The IP and MAC address are displayed with related statistics.
Packets
The total number of packets received and transmitted by the
Router.
Total
Bytes
The total number of bytes received and transmitted by the
Router.
Packets
The total number of packets received and transmitted in the last
Packets Statistic interval seconds.
Bytes
The total number of bytes received and transmitted in the last
Packets Statistic interval seconds.
ICMP
Tx
The number of the ICMP packets transmitted to WAN per second
at the specified Packets Statistics interval. It is shown like
“current transmitting rate / Max transmitting rate”.
UDP Tx
The number of UDP packets transmitted to the WAN per second
at the specified Packets Statistics interval. It is shown like
“current transmitting rate / Max transmitting rate”.
Current
TCP
SYN Tx
The number of TCP SYN packets transmitted to the WAN per
second at the specified Packets Statistics interval. It is shown like
“current transmitting rate / Max transmitting rate”.
Reset
Reset the value of he entry to zero.
Modify
Delete
Delete the existing entry in the table.
There would be 5 entries on each page. Click
Previous
to return to the previous page and
Next
to the next page.
Page 97 / 109
TL-MR3220
3G/4G Wireless N Router User Guide
-88-
Appendix A: FAQ
1.
How do I configure the Router to access Internet by ADSL users?
1)
First, configure the ADSL Modem configured in RFC1483 bridge model.
2)
Connect the Ethernet cable from your ADSL Modem to the WAN port on the Router. The
telephone cord plugs into the Line port of the ADSL Modem.
3)
Login to the Router, click the “Network” menu on the left of your browser, and click "WAN"
submenu. On the WAN page, select “PPPoE/Russia PPPoE” for WAN Connection Type.
Type user name in the “User Name” field and password in the “Password” field, finish by
clicking “Connect”.
Figure A-1 PPPoE Connection Type
4)
If your ADSL lease is in “pay-according-time” mode, select “Connect on Demand” or
“Connect Manually” for Internet connection mode. Type an appropriate number for “Max
Idle Time” to avoid wasting paid time. Otherwise, you can select “Auto-connecting” for
Internet connection mode.
Figure A-2
PPPoE Connection Mode
)
Note:
1)
Sometimes the connection cannot be disconnected although you specify a time to Max
Idle Time, since some applications is visiting the Internet continually in the
background.
2)
If you are a Cable user, please configure the Router following the above steps.
2.
How do I configure the Router to access Internet by Ethernet users?
1)
Login to the Router, click the “Network” menu on the left of your browser, and click "WAN"
submenu. On the WAN page, select “Dynamic IP” for "WAN Connection Type", finish by
clicking “Save”.
Page 98 / 109
TL-MR3220
3G/4G Wireless N Router User Guide
-89-
2)
Some ISPs require that you register the MAC Address of your adapter, which is connected
to your cable/DSL Modem during installation. If your ISP requires MAC register, login to the
Router and click the "Network" menu link on the left of your browser, and then click "MAC
Clone" submenu link. On the "MAC Clone" page, if your PC’s MAC address is proper MAC
address, click the "Clone MAC Address" button and your PC’s MAC address will fill in the
"WAN MAC Address" field. Or else, type the MAC Address into the "WAN MAC Address"
field. The format for the MAC Address is XX-XX-XX-XX-XX-XX. Then click the "Save"
button. It will take effect after rebooting.
Figure A-3 MAC Clone
3.
I want to use Netmeeting, what do I need to do?
1)
If you start Netmeeting as a host, you don’t need to do anything with the Router.
2)
If you start as a response, you need to configure Virtual Server or DMZ Host and make
sure the H323 ALG is enabled.
3)
How to configure Virtual Server: Log in to the Router, click the “
Forwarding
” menu on the
left of your browser, and click "
Virtual Servers
" submenu. On the "
Virtual Servers
" page,
click
Add New…
. Then on the “
Add or Modify a Virtual Server Entry
” page, enter “21” for
the “Service Port” blank, and your IP address for the “IP Address” blank, taking
192.168.0.100 for an example, remember to
Enable
and
Save
.
Figure A-4 Virtual Servers
Page 99 / 109
TL-MR3220
3G/4G Wireless N Router User Guide
-90-
Figure A-5 Add or Modify a Virtual server Entry
)
Note:
Your opposite side should call your WAN IP, which is displayed on the “Status” page.
4)
How to enable DMZ Host: Log in to the Router, click the “
Forwarding
” menu on the left of
your browser, and click "
DMZ
" submenu. On the "DMZ" page, click
Enable
radio button
and type your IP address into the
DMZ Host IP Address
field, using 192.168.0.169 as an
example, remember to click the
Save
button.
Figure A-6 DMZ
5)
How to enable H323 ALG: Log in to the Router, click the “
Security
” menu on the left of
your browser, and click “
Basic Security
” submenu. On the “
Basic Security
” page, check
the
Enable
radio button next to
H323 ALG
. Remember to click the
Save
button.
Page 100 / 109
TL-MR3220
3G/4G Wireless N Router User Guide
-91-
Figure A-7 Basic Security
4.
I want to build a WEB Server on the LAN, what should I do?
1)
Because the WEB Server port 80 will interfere with the WEB management port 80 on the
Router, you must change the WEB management port number to avoid interference.
2)
To change the WEB management port number: Log in to the Router, click the “
Security
”
menu on the left of your browser, and click "
Remote Management
" submenu. On the
"
Remote Management
" page, type a port number except 80, such as 88, into the
Web
Management Port
field. Click
Save
and reboot the Router.
Figure A-8 Remote Management
)
Note:
If the above configuration takes effect, to configure to the Router by typing
http://192.168.0.1:88 (the Router’s LAN IP address: Web Management Port) in the address
field of the Web browser.
3)
Log in to the Router, click the “
Forwarding
” menu on the left of your browser, and click the
"
Virtual Servers
" submenu. On the "
Virtual Servers
" page, click
Add New…
, then on the
“
Add or Modify a Virtual Server
” page, enter “80” into the blank next to the “
Service
Port
”, and your IP address next to the “
IP Address
”, assuming 192.168.0.188 for an
example, remember to
Enable
and
Save
.

Rate

4.7 / 5 based on 3 votes.

Popular TP-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top