1. Home
    2. /
  2. Manuals
    3. /
  3. TP-Link
    4. /
  4. TD-W9980
    5. /
  5. 24
Page 116 / 123 Scroll up to view Page 111 - 115
TD-W9980
N600 Wireless Dual Band Gigabit VDSL2 Modem Router User Guide
106
Firmware Version:
Displays the current firmware version.
Hardware Version:
Displays the current hardware version. The hardware version of the
upgrade file must accord with the modem router’s current hardware version.
To upgrade the modem router's firmware, follow these instructions below:
1)
Download a most recent firmware upgrade file from our website (www.tp-link.com).
2)
Enter or select the path name where you save the downloaded file on the computer into the
File Name
blank.
3)
Click the
Upgrade
button.
4)
The modem router will reboot while the upgrading has been finished.
Note:
1)
New firmware versions are posted at http://www.tp-link.com and can be downloaded for free.
There is no need to upgrade the firmware unless the new firmware has a new feature you
want to use. However, when experiencing problems caused by the modem router rather than
the configuration, you can try to upgrade the firmware.
2)
When you upgrade the modem router's firmware, you may lose its current configurations, so
before upgrading the firmware please write down some of your customized settings to avoid
losing important settings.
3)
Do not turn off the modem router or press the Reset button while the firmware is being
upgraded. Loss of power during the upgrade could damage the modem router.
4)
The firmware version must correspond to the hardware.
5)
The upgrade process takes a few moments and the modem router restarts automatically
when the upgrade is complete.
4.22.9 Reboot
Choose menu “
System Tools
”
→
“
Reboot
”, and then you can click the
Reboot
button to reboot
the modem router via the next screen.
Figure 4-116
Some settings of the modem router will take effect only after rebooting, which include
Change the LAN IP Address (system will reboot automatically).
Change the DHCP Settings.
Change the Wireless configurations.
Change the Web Management Port.
Upgrade the firmware of the modem router (system will reboot automatically).
Page 117 / 123
TD-W9980
N600 Wireless Dual Band Gigabit VDSL2 Modem Router User Guide
107
Restore the modem router's settings to factory defaults (system will reboot
automatically).
Update the configuration with the file (system will reboot automatically.
4.22.10 Statistics
Choose menu “
System Tools
”
→
“
Statistics
”, and then you can view the statistics of the Modem
router, including total traffic and current traffic of the last Packets Statistic Interval.
Figure 4-117
Statistics Status:
Enable or Disable. The default value is disabled. To enable it, click the
Enable
. If it is disabled, the function of DoS protection in Security settings will be disabled.
Statistics Interval (5-60):
The default value is 10. Select a value between 5 and 60 seconds
in the drop-down list. The Packets Statistic interval indicates the time section of the packets
statistic.
Click
Reset
All
to reset the values of all the entries to zero.
Click
Delete
All
to delete all entries in the table.
Click the
Refresh
button to refresh immediately.
Statistics Table:
IP/MAC Address
The IP and MAC address are displayed with related statistics.
Packets
The total number of packets received and transmitted by the
modem router.
Total
Bytes
The total number of bytes received and transmitted by the
modem router.
Packets
The total number of packets received and transmitted in the last
Packets Statistic interval seconds.
Bytes
The total number of bytes received and transmitted in the last
Packets Statistic interval seconds.
Current
ICMP
Tx
The number of the ICMP packets transmitted to WAN per second
at the specified Packets Statistics interval. It is shown like
“current transmitting rate / Max transmitting rate”.
Page 118 / 123
TD-W9980
N600 Wireless Dual Band Gigabit VDSL2 Modem Router User Guide
108
UDP Tx
The number of UDP packets transmitted to the WAN per second
at the specified Packets Statistics interval. It is shown like
“current transmitting rate / Max transmitting rate”.
SYN Tx
The number of TCP SYN packets transmitted to the WAN per
second at the specified Packets Statistics interval. It is shown like
“current transmitting rate / Max transmitting rate”.
Reset
Reset the value of he entry to zero.
Operation
Delete
Delete the existing entry in the table.
4.23 Logout
Choose “
Logout
”, and you will back to the login screen as shown in Figure 4-118.
Figure 4-118
Page 119 / 123
TD-W9980
N600 Wireless Dual Band Gigabit VDSL2 Modem Router User Guide
109
Appendix A: Specifications
General
Standards and Protocols
ANSI T1.413, ITU G.992.1, ITU G.992.3, ITU G.992.5, ITU G.993.2
IEEE802.11p, IEEE802.11e, IEEE802.11b, IEEE802.11g,
IEEE802.11n, IEEE802.3, IEEE802.3u, TCP/IP, PPPoA, PPPoE,
SNTP, HTTP, DHCP, ICMP, NAT
Safety & Emission
FCC, CE
Ports
Four 10/100/1000M Auto-Negotiation RJ45 ports
（
Auto MDI/MDIX)
One RJ11 port
Two USB 2.0 ports
LEDs
Power,
DSL,
Internet,
Wireless 2.4GHz,
Wireless 5GHz,
WPS,
1,2,3,4(LAN),
(USB on the
back panel)
Network Medium
10Base-T:
UTP category 3, 4, 5 cable
100Base-TX: UTP category-5, 5e cable
1000Base-TX: UTP category-5, 5e cable
Max line length: 6.5Km
Data Rates
Downstream: Up to 100Mbps
Upstream: Up to 100Mbps
System Requirement
Windows 8/7/Vista/XP or Mac OS or Linux-based operating system
Microsoft Internet Explorer, Firefox, Chrome or Safari browser for
web-based configuration
Physical and Environment
Working Temperature
0
~ 40
℃
℃
Working Humidity
10% ~ 90% RH (non-condensing)
Storage Temperature
-40
~ 70
℃
℃
Storage Humidity
5% ~ 90% RH (non-condensing)
Page 120 / 123
TD-W9980
N600 Wireless Dual Band Gigabit VDSL2 Modem Router User Guide
110
Appendix B: Troubleshooting
T1. How do I restore my modem router’s configuration to its factory default
settings?
With the modem router powered on, press and hold the
RESET
button on the rear panel for 8 to
10 seconds before releasing it.
Note
:
Once the modem router is reset, the current configuration settings will be lost and you will need to
re-configure the router.
T2. What can I do if I don’t know or forget my password?
1) Restore the modem router’s configuration to its factory default settings. If you don’t know how
to do that, please refer to
T1
.
2) Use the default user name and password:
admin
,
admin
.
3) Try to configure your modem router once again by following the instructions in
3.2 Quick
Installation Guide
.
T3. What can I do if I cannot access the web-based configuration page?
1) Configure your computer’s IP Address.
For Mac OS X
Click the
Apple
icon on the upper left corner of the screen.
Go to “
System Preferences
->
Network
”.
Select
Airport
on the left menu bar, and then click
Advanced
for wireless configuration; or
select
Ethernet
for wired configuration.
In the
Con-figure IPv4
box under
TCP/IP
, select
Using DHCP
.
Click
Apply
to save the settings.
For Windows 7
Click “
Start
->
Control Panel
->
Network and Internet
->
View network status
->
Change
adapter settings
”.
Right-click
Wireless Network Connection
(or
Local Area Connection
), and then click
Properties
.
Select
Internet Protocol Version 4 (TCP/IPv4)
, and then click
Properties
.
Select
Obtain an IP address automatically
and
Obtain DNS server address automatically
.
Then click
OK
.
For Windows XP
Click “
Start
->
Control Panel
->
Network and Internet Connections
->
Network
Connections
”.
Right-click
Wireless Network Connection
(or
Local Area Connection
), and then click
Properties
.
Select
Internet Protocol (TCP/IP)
, and then click
Properties
.

Rate

3.5 / 5 based on 2 votes.

Popular TP-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top