1. Home
    2. /
  2. Manuals
    3. /
  3. TP-Link
    4. /
  4. TD-W9980
    5. /
  5. 21
Page 101 / 123 Scroll up to view Page 96 - 100
TD-W9980
N600 Wireless Dual Band Gigabit VDSL2 Modem Router User Guide
91
4.
Select a target from the
IPv6 WAN Host
st or choose “
Add IPv6 WAN Host
”.
ose “
Add IPv6 Schedule
”.
v6. Select one of them
selected entries.
t list in
drop-sown li
5.
Select a schedule from the
IPv6
Schedule
drop-down list or cho
6.
In the
Action
field, select
Deny
or
Allow
to deny or allow your entry.
7.
In the
Status
field, select
Enabled
or
Disabled
to enable or disable your entry.
8.
In the
Direction
field, select
IN
or
OUT
from the drop-down list for the direction.
9.
In the
Protocol
field, here are four options, All, TCP, UDP, and ICMP
from the drop-down list for the target.
10. Click the
Save
button to save the settings.
Click the
Enable/ Disable Selected
button to make selected entries enabled or disabled.
Click the
Delete Selected
button to delete
4.16.2 IPv6 LAN Host
Choose menu “
IPv6
Firewall
”
→
“
IPv6 LAN
Host
”, and then you can view and set a Hos
the screen as shown in Figure 4-90.
Figure 4-90
Description:
Here displays the description of the host and this description is unique.
IPv6 Address Info:
Here displays the information about the host.
Edit:
To modify an existing entry.
Figure 4-91.
To add a new entry, please follow the steps below.
1.
Click the
Add New
button, and you will see the screen as shown in
Figure 4-91
2.
Create a unique name for the host (e.g. Host_1) in the
Description
field.
3.
Enter an IPv6 address in the
IPv6 Address
field.
4.
Enter the prefix length of the IPv6 addre
fix Length
field.
Click the
Delete Selected
button to delete selected entries.
ss in the
Pre
5.
Click the
Save
button to save the settings.
Page 102 / 123
TD-W9980
N600 Wireless Dual Band Gigabit VDSL2 Modem Router User Guide
92
and set a Host list in
4.16.3 IPv6 WAN Host
Choose menu “
IPv6 Firewall
”
→
“
IPv6 WAN
Host
”, and then you can view
the screen as shown in Figure 4-92.
Figure 4-92
Description:
Here displays the description about the WAN and this description is unique.
Details:
The details can be IPv6 address, prefix length or port.
Edit:
To modify an existing entry.
To add a new entry, please follow the steps below.
1.
Click the
Add New
button, and you will see the screen as shown in Figure 4-93.
Figure 4-93
2.
Create a unique description for the host (e.g. Host_1) in the
Description
field.
3.
Enter an IPv6 address in the
IPv6 Address
field.
4.
Enter the prefix length of the IPv6 address in the
Prefix Length
field.
5.
Click the
Save
button to save the settings.
Click the
Delete Selected
button to delete selected entries.
4.16.4 IPv6 Schedule
Choose menu “
IPv6 Firewall
”
→
“
IPv6 Schedule
”, and then you can view and set a Schedule list
in the next screen as shown in Figure 4-94.
Figure 4-94
Page 103 / 123
TD-W9980
N600 Wireless Dual Band Gigabit VDSL2 Modem Router User Guide
93
Description
: Here displays the description of the schedule and this description is unique.
Edit
: Here you can modify an existing schedule.
To add a new schedule, follow the steps below:
1.
Click
Add New
button and you will see the screen as shown in Figure 4-95.
Figure 4-95
2.
Create a unique description for the schedule (e.g. Schedule_1) in
Description
field.
3.
Select the day or days you need in
Apply To
field.
4.
In time field, you can select all day-24 hours or you may enter the
Start Time
and
Stop Time
in the corresponding field.
5.
Click
Save
to save the settings.
Click the
Clear Schedule
button to clear you
works to reach each-other over IPv4-only infrastructure before
temporary solution for networks that do not support native
shown in Figure 4-96.
r settings in the table.
Click the
Delete Selected
button to delete selected entries.
4.17 IPv6 Tunnel
IPv6 tunnel is a kind of transition mechanism to enable IPv6-only hosts to reach IPv4 services and
to allow isolated IPv6 hosts and net
IPv6 completely supplants IPv4. It is a
dual-stack, where both IPv6 and IPv4 run independently.
Choose menu “
IPv6 Tunnel
”, and you will see the screen as
Page 104 / 123
TD-W9980
N600 Wireless Dual Band Gigabit VDSL2 Modem Router User Guide
94
Figure 4-96
Enable:
Check the box to enable IPv6 Tunnel function. It is disabled by default.
Mechanism:
Select a type for IPv6 tunnel from the drop-down list. DS-Lite, 6RD and 6to4 are
supported.
see the screen as shown in Figure 4-97.
1)
DS-Lite
This type is used in the situation that your WAN connection is IPv6 while LAN connection is IPv4.
Select DS-Lite, and you will
Figure 4-97
WAN Connection:
Select a WAN connection from the drop-down list. Only the connected
WAN connections can be shown in the drop-down list.
Configuration Type:
Select a configur
this tunnel. Auto means to obtain the
emote node.
IPv4 WAN connections,
ation type for
Remote IPv6 Address automatically while Manual means you set it manually.
Remote IPv6 Address:
Enter the IPv6 address of the r
Note:
In this type, there should not have any IPv4 WAN connections. If there are
the page will prompt you to delete all the IPv4 WAN connections.
2)
6RD
This type is used in the situation that your WAN connection is IPv4 while LAN connection is IPv6.
Select 6RD, and you will see the screen as shown in Figure 4-98.
Page 105 / 123
TD-W9980
N600 Wireless Dual Band Gigabit VDSL2 Modem Router User Guide
95
Figure 4-98
WAN Connection:
Select a WAN connection from the drop-down list. Only the connected
WAN connections can be shown in the drop-down list.
Configuration Type:
Select a configuration type for this tunnel. Auto means to obtain the
following parameters automatically while Manual means you set them manually. If Auto is
selected, only Dynamic IP connection can be selected from the drop-down list.
IPv4 Mask Length:
The length of the selected WAN connection’s IPv4 mask.
6RD Prefix:
The prefix of the 6RD tunnel.
6RD Prefix Length:
The length of the 6RD prefix.
Border Relay IPv4 Address:
The IPv4 address of the border relay router of 6RD tunnel.
Note:
In this type, there should not have any IPv6 WAN connections. If there are IPv6 WAN connections,
the page will prompt you to delete all the IPv6 WAN connections.
3)
6to4
This type is used in the situation that your WAN connection is IPv4 while LAN connection is IPv6.
Select 6to4, and you will see the screen as shown in Figure 4-99.
Figure 4-99
WAN Connection:
Select a WAN connection from the drop-down list. Only the connected
WAN connections can be shown in the drop-down list.
Note:
In this type, there should not have any IPv6 WAN connections. If there are IPv6 WAN connections,
the page will prompt you to delete all the IPv6 WAN connections.

Rate

3.5 / 5 based on 2 votes.

Popular TP-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top