TD-W8960NB

300Mbps Wireless N ADSL2+ Modem Router User Guide

Figure 4-66

Method Two:

Step 1:

Press the QSS button on the front panel of the Router.

Step 2: For the configuration of the wireless adapter, please choose “

Push the button on my

access point

”

in the

configuration utility of the QSS as below, and click

Next

.

Figure 4-67

64

TD-W8960NB

300Mbps Wireless N ADSL2+ Modem Router User Guide

Step 3: Wait for a while until the next screen appears. Click

Finish

to complete the QSS

configuration.

Figure 4-68

II. By PIN

If the new device supports Wi-Fi Protected Setup and the PIN method, you can add it to the

network by PIN with the following two methods.

Method One:

Enter the PIN of wireless adapter into my Router.

Step 1: Select the

PIN

checkbox and enter the PIN code of the wireless adapter in the field under

as shown below. Then click

Add Enrollee

.

65

TD-W8960NB

300Mbps Wireless N ADSL2+ Modem Router User Guide

Figure 4-69

)

Note:

The PIN code of the adapter is always displayed on the QSS configuration screen.

Step 2: For the configuration of the wireless adapter, please choose “

Enter a PIN into my

access point or a registrar

”

in the

configuration utility of the QSS as below, and click

Next

.

66

TD-W8960NB

300Mbps Wireless N ADSL2+ Modem Router User Guide

Figure 4-70

)

Note:

In this example, the default PIN code of this adapter is 16952898 as the preceding figure shown.

Method Two:

Enter the PIN of my Router into the wireless adapter.

Step 1: Get the Current PIN code generated by the Router as shown below. You can click

Gen

New PIN

to get a new PIN code for Router.

67

TD-W8960NB

300Mbps Wireless N ADSL2+ Modem Router User Guide

Figure 4-71

Step 2: For the configuration of the wireless adapter, please choose “

Enter a PIN from my

access point

”

in the

configuration utility of the QSS as below, and enter the PIN code of

the Router into the field after “

Access Point PIN

”. Then click

Next

.

68