Page 61 / 110
Scroll up to view Page 56 - 60
TD-W8960NB
300Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 4-57
Select the checkbox and click
Save/Apply
to enable the UPnP function.
4.4.13 Interface Grouping
Choose “
Advanced Setup
”
Æ
“
Interface Grouping
”, you can configure multiple ports to PVC and
bridging groups to perform as an independent network.
Figure 4-58
To support this feature, you must create mapping groups with appropriate LAN and WAN
interfaces using the
Add
button. The
Remove
button will remove the grouping and add the
ungrouped interfaces to the Default group. Only the default group has IP interface.
To create a new interface group:
1.
Click the
Add
button. You can add a new interface group in the next screen.
54
Page 62 / 110
TD-W8960NB
300Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 4-59
2.
Enter a unique name for Group.
3.
Select the Interface which you want to use from the drop-down list.
)
Note:
If you like to automatically add LAN clients to a WAN Interface in the new group add the DHCP
vendor ID string. By configuring a DHCP vendor ID string any DHCP client request with the
specified vendor ID (DHCP option 60) will be denied an IP address from the local DHCP server.
4.
Select interfaces from the available interface list and add it to the grouped interface list using
the arrow buttons to create the required mapping of the ports.
55
Page 63 / 110
TD-W8960NB
300Mbps Wireless N ADSL2+ Modem Router User Guide
)
Note:
These clients may obtain public IP addresses.
5.
Click
Save/Apply
to make the entry effective immediately.
)
Note:
If a vendor ID is configured for a specific client device, please REBOOT the client device attached
to the modem to allow it to obtain an appropriate IP address.
4.4.14 LAN Ports
Choose “
Advanced Setup
”
Æ
“
LAN Ports
”, you can Enable/Disable the Virtual LAN Ports feature
by selecting the checkbox on the screen.
Figure 4-60
4.4.15 IPSec
Choose “
Advanced Setup
”
Æ
“
IPSec
”, you can Add/Remove or Enable/Disable the IPSec tunnel
connections on the screen as shown in Figure 4-61.
56
Page 64 / 110
TD-W8960NB
300Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 4-61
This section will guide you to configure a VPN tunnel between two TD-W8960NBs. The topology is
as follows.
)
Note:
You could also use other VPN Routers to set VPN tunnels with TD-W8960NB. TD-W8960NB
supports up to 10 VPN tunnels simultaneously.
57
Page 65 / 110
TD-W8960NB
300Mbps Wireless N ADSL2+ Modem Router User Guide
Click
Add New Connection
in Figure 4-61 and then you will enter the screen shown in Figure
4-62.
Figure 4-62
¾
IPSec Connection Name:
Enter a name for your VPN.
¾
Remote IPSec Gateway Address (IP or Domain Name):
Enter the destination gateway IP
address in the box which is the public WAN IP or Domain Name of the remote VPN server
endpoint. (For example: Input
219.134.112.247
in
Device1
, Input
219.134.112.246
in
Device
2
)
¾
Tunnel access from local IP addresses:
Choose Subnet if you want the Whole LAN to join
the VPN network, or else choose Single Address if you want single IP to join the VPN network.
¾
IP Address for VPN:
Enter the IP address of your LAN. (For example: Input
192.168.1.1
in
Device1
, Input
192.168.2.1
in
Device2
)
¾
IP Subnetmask:
Enter the Subnet mask of your LAN. ( For example: Input
255.255.255.0
in
both
Device1
and
Device2
)
¾
Tunnel access from remote IP addresses:
Choose Subnet if you want the Remote Whole
LAN to join the VPN network, or else choose Single Address if you want single IP to join the
VPN network.
¾
IP Address for VPN:
Enter the IP address of the Remote LAN. ( For example: Input
192.168.2.1
in
Device1
,Input
192.168.1.1
in
Device2
)
58
19216811.live