Page 16 / 122 Scroll up to view Page 11 - 15
TD-W8960N
300Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 3-2
Step 3:
Select
General
tab, highlight
Internet Protocol (TCP/IP)
, and then click the
Properties
button.
Figure 3-3
9
Page 17 / 122
TD-W8960N
300Mbps Wireless N ADSL2+ Modem Router User Guide
Step 4:
Configure the IP address as Figure 3-4 shows. After that, click
OK
.
Figure 3-4
)
Note:
You can configure the PC to get an IP address automatically, select “Obtain an IP address
automatically” and “Obtain DNS server address automatically” in the screen above.
Now, you can run the Ping command in the command prompt to verify the network connection.
Please click the
Start
menu on your desktop, select
run
tab, type
cmd or command
in the field
and press
Enter
. Type
on the next screen, and then press
Enter
.
If the result displayed is similar to the screen below, the connection between your PC and the
Router has been established.
Figure 3-5
10
Page 18 / 122
TD-W8960N
300Mbps Wireless N ADSL2+ Modem Router User Guide
If the result displayed is similar to the screen shown below, it means that your PC has not
connected to the Router.
Figure 3-6
You can check it following the steps below:
1)
Is the connection between your PC and the Router correct?
The LEDs of LAN port which you link to the device and the LEDs on your PC's adapter should
be lit.
2)
Is the TCP/IP configuration for your PC correct?
If the Router's IP address is 192.168.1.1, your PC's IP address must be within the range of
192.168.1.2 ~ 192.168.1.254.
3.2 Quick Installation Guide
With a Web-based utility, it is easy to configure and manage the TD-W8960N 300Mbps Wireless N
ADSL2+ Modem Router. The Web-based utility can be used on any Windows, Macintosh or UNIX
OS with a Web browser, such as Microsoft Internet Explorer, Mozilla Firefox or Apple Safari.
1.
To access the configuration utility, open a web-browser and type the default address
http://192.168.1.1 in the address field of the browser.
Figure 3-7
After a moment, a login window will appear, similar to the Figure 3-8. Enter
admin
for the
User Name and Password, both in lower case letters. Then click the
OK
button or press the
Enter
key.
11
Page 19 / 122
TD-W8960N
300Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 3-8
)
Note:
1)
Do not mix up the user name and password with your ADSL account user name and password
which are needed for PPP connections.
2)
If the above screen does not pop up, it means that your Web-browser has been set to a proxy.
Go to
Tools
menu
Internet Options
Connections
LAN Settings
, in the screen that
appears, cancel the Using Proxy checkbox, and click
OK
to finish it.
2.
After your successful login, you will see the Login screen as shown in Figure 3-9. Click
Quick
Setup
menu to access
Quick Setup
Wizard
.
Figure 3-9
3.
Change the VPI or VCI values which are used to define a unique path for your connection.
If
you have been given specific settings for this to configuration, type in the correct
12
Page 20 / 122
TD-W8960N
300Mbps Wireless N ADSL2+ Modem Router User Guide
values assigned by your ISP.
Here we select PPPoE WAN Link Type for example, enter the
Username
and
Password
given by your ISP, and then click
Next
.
Figure 3-10
)
Note:
The Quick Setup Wizard will guide you to configure the WAN Service over ATM interface.
4.
On the
Wireless Configurations
screen, we use the default SSID, select Network
Authentication (take
Mixed
WPA2/WPA-PSK Personal
for example), set a Pre-Shared Key,
and then click
Save
to continue.
13

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top