Page 76 / 122
Scroll up to view Page 71 - 75
TD-W8960N
300Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 4-68
4.5.2.1 QSS (WPS) Setup
Back to LED Explanation
This section will guide you to add a new wireless device to an existing network quickly by
QSS
(Quick Security Setup)
method. It’s also called WPS (Wi-Fi Protected Setup) in some cases.
)
Note:
1) This feature is available only when OPEN, WPA-PSK, WPA2-PSK or Mixed WPA2/WPA-PSK
mode is configured.
2)
To build a successful connection by QSS, you should also do the corresponding configuration
of the new device for QSS function meanwhile.
3)
QSS (
Quick Security Setup
) is one kind of WPS (Wi-Fi Protected Setup) method.
I. By PBC
If the wireless adapter supports Quick Security Setup and the Push Button Configuration (PBC)
method, you can add it to the network by PBC with the following two methods. Click
Push-Button
,
you will see the screen as shown below.
69
Page 77 / 122
TD-W8960N
300Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 4-69
Method One:
Hardware push button.
Step 1:
Press the QSS button on the front panel of the Router.
Step 2:
Press and hold the QSS button of the adapter directly for 2 or 3 seconds.
Step 3: Wait for a while until the next screen of adapter appears. Click
Finish
to complete the
QSS configuration.
70
Page 78 / 122
TD-W8960N
300Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 4-70
Method Two:
Step 1:
Press the QSS button on the front panel of the Router.
Step 2: For the configuration of the wireless adapter, please choose “
Push the button on my
access point
”
in the
configuration utility of the QSS as below, and click
Next
.
Figure 4-71
71
Page 79 / 122
TD-W8960N
300Mbps Wireless N ADSL2+ Modem Router User Guide
Step 3: Wait for a while until the next screen appears. Click
Finish
to complete the QSS
configuration.
Figure 4-72
II. By PIN
If the new device supports Quick Security Setup and the PIN method, you can add it to the
network by PIN with the following two methods.
Method One:
Enter the PIN of wireless adapter into my Router.
Step 1: Select the
PIN
checkbox and enter the PIN code of the wireless adapter in the field under
as shown below. Then click
Add Enrollee
.
72
Page 80 / 122
TD-W8960N
300Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 4-73
)
Note:
The PIN code of the adapter is always displayed on the QSS configuration screen.
Step 2: For the configuration of the wireless adapter, please choose “
Enter a PIN into my
access point or a registrar
”
in the
configuration utility of the QSS as below, and click
Next
.
73
19216811.live