Page 66 / 122
Scroll up to view Page 61 - 65
TD-W8960N
300Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 4-59
2.
Select
D-DNS provider
in the drop-down list.
3.
Enter the
Hostname
of the DNS Server, and select the corresponding
Interface
for the
DDNS, you can leave it default.
4.
Type the
User Name
and
Password
for your DDNS account.
5.
Click
Save/Apply
to save the entry and then you will see your settings as shown in Figure
4-58.
4.4.12 DSL
Choose “
Advanced Setup
”
Æ
“
DSL
”, you can see the DSL Settings screen, this screen allows you
to configure the DSL (shown in Figure 4-60).
59
Page 67 / 122
TD-W8960N
300Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 4-60
You can select the modulation type, phone line pair and the capability of Bitswap or SRA. After
you set them up, click
Save/Apply
to save the configurations.
4.4.13 UPnP
Choose “
Advanced Setup
”
Æ
“
UPnP
”, you can Enable or Disable the UPnP (Universal Plug and
Play) protocol on the screen.
UPnP (Universal Plug and Play) is a distributed, open networking standard that uses TCP/IP for
simple peer-to-peer network connectivity between devices. An UPnP device can dynamically join
a network, obtain an IP address, convey its capabilities and learn about other devices on the
network. In turn, a device can leave a network smoothly and automatically when it is no longer in
use. UPnP broadcasts are only allowed on the LAN.
60
Page 68 / 122
TD-W8960N
300Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 4-61
Select the checkbox and click
Save/Apply
to enable the UPnP function.
4.4.14 Interface Grouping
Choose “
Advanced Setup
”
Æ
“
Interface Grouping
”, you can configure multiple ports to PVC and
bridging groups to perform as an independent network.
Figure 4-62
To support this feature, you must create mapping groups with appropriate LAN and WAN
interfaces using the
Add
button. The
Remove
button will remove the grouping and add the
ungrouped interfaces to the Default group. Only the default group has IP interface.
61
Page 69 / 122
TD-W8960N
300Mbps Wireless N ADSL2+ Modem Router User Guide
To create a new interface group:
1.
Click the
Add
button. You can add a new interface group in the next screen.
Figure 4-63
2.
Enter a unique name for Group.
3.
Select the Interface which you want to use from the drop-down list.
)
Note:
If you like to automatically add LAN clients to a WAN Interface in the new group add the DHCP
vendor ID string. By configuring a DHCP vendor ID string any DHCP client request with the
specified vendor ID (DHCP option 60) will be denied an IP address from the local DHCP server.
62
Page 70 / 122
TD-W8960N
300Mbps Wireless N ADSL2+ Modem Router User Guide
4.
Select interfaces from the available interface list and add it to the grouped interface list using
the arrow buttons to create the required mapping of the ports.
)
Note:
These clients may obtain public IP addresses.
5.
Click
Save/Apply
to make the entry effective immediately.
)
Note:
If a vendor ID is configured for a specific client device, please REBOOT the client device attached
to the modem to allow it to obtain an appropriate IP address.
4.4.15 LAN Ports
Choose “
Advanced Setup
”
Æ
“
LAN Ports
”, you can Enable/Disable the Virtual LAN Ports feature
by selecting the checkbox on the screen.
Figure 4-64
4.4.16 IPSec
Choose “
Advanced Setup
”
Æ
“
IPSec
”, you can Add/Remove or Enable/Disable the IPSec tunnel
connections on the screen as shown in Figure 4-65.
63
19216811.live