19216811.liveTD-8840
ADSL2+ Modem Router User Guide
55
Appendix A:
FAQ
1.
What related parameters are required to acquire ISP when you want to access the
Internet by ADSL2+ Modem Router?
1)
Dial user: Connection protocol, User name, Password, Value of VPI/VCI, Encapsulation
mode of AAL5 and so on.
2)
Static IP user: Connection protocol, WAN IP Address, Subnet Mask, Gateway, DNS,
Value of VPI/VCI, Encapsulation mode of AAL5 and so on.
2.
About Connection protocol, VCI/VPI, Encapsulation mode of AAL5
1)
This product supports the PPP protocol over ATM (PPPoA)
、
PPP over Ethernet
(PPPoE)
、
MAC Encapsulation Routing (MER)
、
IP over ATM (IPoA) and Bridging. You
may use any one of the five protocols above. Because the ISP in different areas
supports different protocol, you must choose the protocol supported by your ISP.
2)
The VPI is the English abbreviation of the Virtual Path Identifier, the VCI is the English
abbreviation of the Virtual Channel Identifier, and the value of VCI/VPI must be
compatible with that provided by ISP.
3)
Encapsulation mode of AAL5 include: LLC/SNAP and VC_MAX (often using
LLC/SNAP).
3.
Why the LAN’s and the NIC’s LEDs are both bright, but the configuration interface is
inaccessible?
1)
Use the order of
ping 192.168.1.1
to check the Accuracy of connection.
2)
Check the Accuracy of working NIC.
3)
Check the setup of the IP address on your computer. If you disabled the DHCP function,
the IP address can’t be obtained automatically, so you have to specify the IP address for
your computer manually.
4)
Run the
ipconfig
command in the windows 2000 to check whether the IP address,
subnet mask, and default gateway have been assigned by DHCP..
5)
Reboot the ADSL Modem default configuration if necessary.
4.
Have completed all configurations, but can’t dial through computer
1)
Check the indicator of ADSL. It should be working normally.
2)
Check the value of VPI/VCI, Encapsulation mode of AAL5 and so on, and whether you