Page 51 / 63
Scroll up to view Page 46 - 50
TD-8840
ADSL2+ Modem Router User Guide
45
4.5
Management
Choose “
Management
”, and you can see the submenus as shown in Figure 4-39.
Figure 4-39
4.5.1 Settings
Choose “
Management
→
Settings
” menu, and you will see the submenus as shown in Figure
4-40.
Figure 4-40
4.5.1.1. Backup
Choose “
Settings
→
Backup
” menu, and you can save the current configuration of the Router as
a backup file in Figure 4-41. Click
Backup Settings
button to save your current configuration.
Figure 4-41
Page 52 / 63
TD-8840
ADSL2+ Modem Router User Guide
46
4.5.1.2. Update
Choose “
Settings
→
Update
” menu, and you can update the settings for the Router as shown in
Figure 4-42. Click the
Browse…
button to find the file you want to update and then click
Update
Settings
to begin the updating.
Figure 4-42
4.5.1.3. Restore Default
Choose “
Settings
→
Restore Default
” menu, and you can restore the configurations of the Router
to its factory default as shown in Figure 4-43. Click the
Restore Default Settings
button to begin
restoring.
Figure 4-43
Page 53 / 63
TD-8840
ADSL2+ Modem Router User Guide
47
4.5.2 System Log
Choose “
Management
→
System Log
” menu, and you can view and configure the logs of the
Router in Figure 4-44. Click the
View System Log
button, and you will go to the System Log page
and see the logs similar to Figure 4-45. Click the
Configure System Log
button, and you will go
to the Configuration page as shown in Figure 4-46.
Figure 4-44
Figure 4-45
Page 54 / 63
TD-8840
ADSL2+ Modem Router User Guide
48
Figure 4-46
¾
Log -
Check the
Disable
radio button to disable the system log function. The default setting
is enabled.
¾
Log Level -
Select the log level, then all the events above or equal to the selected level will
be logged.
¾
Display Level -
All logged events above or equal to the selected level will be displayed.
¾
Mode -
Select Local, Remote or Both. If the selected mode is
Remote
or
Both
, events will be
sent to the specified IP address and UDP port of the remote syslog server. If the selected
mode is
Local
or
Both
, events will be recorded in the local memory.
4.5.3 SNMP Agent
Choose “
Management
→
SNMP Agent
” menu, and you will go to the SNMP (Simple Network
Management Protocol) page as shown in Figure 4-47. SNMP allows a management application to
retrieve statistics and status from the SNMP agent in this device. Select the desired values and
click
Save/Apply
to configure the SNMP options.
Page 55 / 63
TD-8840
ADSL2+ Modem Router User Guide
49
Figure 4-47
4.5.4 Access Control
Choose “
Management
→
Access Control
” menu, and you will submenus as shown in Figure
4-48.
Figure 4-48
4.5.4.1. Service
Choose “
Access Control
→
Service
” menu, and you can enable or disable the services as shown
in Figure 4-49. Click
Save/Apply
to save your configurations.
Figure 4-49
19216811.live