Page 76 / 78 Scroll up to view Page 71 - 75
TD-8811
ADSL2+ Modem Router User Guide
71
Appendix A:
FAQ
1.
What related parameters are required to acquire ISP when you want to access the
internet by ADSL Router?
1)
Dial user: Connection protocol, User name, Password, Value of VPI/VCI,
Encapsulation mode of AAL5 and so on.
2)
Static IP user: Connection protocol, WAN IP Address, Subnet Mask, Gateway, Value
of VPI/VCI, Encapsulation mode of AAL5 and so on.
2.
About Connection protocol, VCI/VPI, Encapsulation mode of AAL5
1)
This product supports the PPP protocol over ATM (PPPoA)
PPP over Ethernet
(PPPoE)
MAC Encapsulation Routing (MER)
IP over ATM (IPoA) and Bridging. You
may be used with any one of the five protocols above. Because the ISP in different
areas supports different protocol, you must choose the protocol which is supported by
your ISP.
2)
The VPI is the English abbreviation of the Virtual Path Identifier, the VCI is the English
abbreviation of the Virtual Channel Identifier, the value of VCI/VPI must be compatible
with the value that provided by ISP.
3)
Encapsulation mode of AAL5 include: LLC/SNAP and VC_MAX(often using
LLC/SNAP).
3.
Why the LAN’s and the NIC’s LED both bright, but the configuration interface is
inaccessible?
1)
Use the order of
to check the Accuracy of connection.
2)
Check the Accuracy of working NIC.
3)
Whatever the setup of the IP address on your computer (if you close the DHCP
function, you can't obtain the IP address automatically, must specify the IP address of
your computer manually).
4)
Run the winipcfg order in the windows 95/98(run the ipconfig order in the windows
2000) to check whether setup the IP address, subnet mask, default gateway by DHCP.
5)
Resume the ADSL Modem default configuration if necessary.
4.
Have complete all configurations, but can’t dial through computer
1)
Check the indicator of ADSL, it should be working in normally.
2)
Check the accuracy of parameter of value of VPI/VCI, Encapsulation mode of AAL5
Page 77 / 78
TD-8811
ADSL2+ Modem Router User Guide
72
and so on, whether you need to install the dial software, such as Winpoet, Enternet.
3)
This product has the PPP dial procedure inside
,
so you will not need to use the dial
software if your protocol is PPPoA or PPPoE, ADSL Modem will connect
automatically.
4)
You can check whether your ADSL Modem succeeds in connection with
PING
command.
Page 78 / 78
TD-8811
ADSL2+ Modem Router User Guide
73
Appendix B:
Default Config
User name
admin
Password
admin
IP Address
192.168.1.1

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top