Page 66 / 78
Scroll up to view Page 61 - 65
TD-8811
ADSL2+ Modem Router User Guide
61
4.5.1.3 Restore Default
Choose “
Settings
→
Restore Default
” menu, and you can restore the configurations of the
Router to its factory default as shown in Figure 4-43. Click the
Restore Default Settings
button
to begin restoring.
Figure 4-43
4.5.2 System Log
Choose “
Management
→
System Log
” menu, and you can view and configure the logs of the
Router in Figure 4-44.
Figure 4-44
Click the
View System Log
button, and you will go to the System Log page and see the logs
similar to Figure 4-45.
Page 67 / 78
TD-8811
ADSL2+ Modem Router User Guide
62
Figure 4-45
Click the
Configure System Log
button, and you will go to the Configuration page as shown in
Figure 4-46.
Figure 4-46
¾
Log -
Check the
Disable
radio button to disable the system log function. The default
setting is enabled.
¾
Log Level -
Select the log level, then all the events above or equal to the selected level will
be logged.
¾
Display Level -
All logged events above or equal to the selected level will be displayed.
¾
Mode -
Select Local, Remote or Both. If the selected mode is
Remote
or
Both
, events will
be sent to the specified IP address and UDP port of the remote syslog server. If the
selected mode is
Local
or
Both
, events will be recorded in the local memory.
Page 68 / 78
TD-8811
ADSL2+ Modem Router User Guide
63
4.5.3 SNMP Agent
Choose “
Management
→
SNMP Agent
” menu, and you will go to the SNMP (Simple Network
Management Protocol) page as shown in Figure 4-47. SNMP allows a management application
to retrieve statistics and status from the SNMP agent in this device. Select the desired values
and click
Save/Apply
to configure the SNMP options.
Figure 4-47
4.5.4 Access Control
Choose “
Management
→
Access Control
” menu, and you will submenus as shown in Figure
4-48.
Figure 4-48
4.5.4.1 Service
Choose “
Access Control
→
Service
” menu, and you can enable or disable the services as
shown in Figure 4-49. Click
Save/Apply
to save your configurations.
Page 69 / 78
TD-8811
ADSL2+ Modem Router User Guide
64
Figure 4-49
4.5.4.2 IP Address
Choose “
Access Control
→
IP Address
” menu, and can view and configure the IP address
access control in the screen as shown in Figure 4-50. If enabled, only PCs with IP addresses
listed are allowed to access the Router.
Figure 4-50
To add a new entry, follow the steps below.
1.
Click the
Add
button in Figure 4-50 to go to the
Access Control
page in the screen as
shown in Figure 4-51.
Page 70 / 78
TD-8811
ADSL2+ Modem Router User Guide
65
2.
Enter the IP address (e.g. 192.168.1.23) you want to add in the IP Address filed.
3.
Click
Save/Apply
to save your configuration.
Figure 4-51
4.5.4.3 Password
Choose “
Access Control
→
Password
” menu, and you can change the factory default
password of the Router in the screen as shown in Figure 4-52.
Figure 4-52
19216811.live