1. Home
    2. /
  2. Manuals
    3. /
  3. TP-Link
    4. /
  4. M5350
    5. /
  5. 3
Page 11 / 47 Scroll up to view Page 6 - 10
M5350
3G Mobile Wi-Fi User Guide
-4-
Chapter 2.
Hardware Installation
2.1 Environment Requirements
Place the Device in a well-ventilated place far from any heater or heating vent
Avoid direct irradiation of any strong light (such as sunlight)
Keep at least 2 inches (5 cm) of clear space around the Device
Operating Temperature: 15
℃
~40
℃
(59
℉
~104
℉
)
Operating Humidity: 0%~75%RH, Non-condensing
2.2 Hardware Installation
STEP 1: Install SIM card and memory card.
1)
Open the cover upwards (as the arrow shows).
2)
Make sure to have the SIM
card‟s metal chip downwards and the triangle notch outwa
rds,
and then slide the card into its slot (in the direction as the arrow shows).
Note:
If you have a Micro-SIM or Nano-SIM, please use an adapter to convert it to a standard SIM
card.
3)
First
, push and then lift the locker to open it.
Second
, have the m
emory card‟s metal chip
downwards and inwards, and then fit it in its slot.
Finally
, put down and then pull the locker
to lock it.
Page 12 / 47
M5350
3G Mobile Wi-Fi User Guide
-5-
Note:
The micro SD memory card is optional. You can purchase it appropriate to your own need.
STEP 2: Install the battery.
1)
Touch the metal contacts of the battery to the metal points of the Device, and then press to
fit the battery body into the slot.
2)
Before closing the cover, please note down the SSID and the wireless password on the
label for later use.
SSID:
The wireless network name of M5350
Wireless Password:
The pre-encryption of M5350
3)
Close the cover by pressing it.
Page 13 / 47
M5350
3G Mobile Wi-Fi User Guide
-6-
Note:
It‟s advised that you do not use M5350 until the battery has been installed.
When finishing the above two-step installation, you can press the power button
for about
5 seconds to turn on M5350.
Tips:
You are supported to charge the battery in two ways:
Method 1:
1) Connect one end of the USB cable to the micro USB port.
2) Connect the other end of the USB cable to the USB port of the power adapter.
3) Plug the power adapter to a standard wall socket.
Method 2:
1) Connect one end of the USB cable to the micro USB port.
2) Connect the other end of the USB cable to the USB port of your PC.
Page 14 / 47
M5350
3G Mobile Wi-Fi User Guide
-7-
Chapter 3.
Quick Installation Guide
This chapter will guide you to quickly set up the basic functions for your M5350 3G Mobile
Wi-Fi.
3.1 System Requirements
SIM card with Internet access enabled.
Computer with wireless network card.
Web browser, such as Mozilla Firefox, Internet Explorer, Google Chrome, Apple Safari, etc.
3.2 TCP/IP Configuration
The default IP address of the M5350 3G Mobile Wi-Fi is 192.168.0.1, and the default Subnet
Mask is 255.255.255.0, which values can be changed as you desire. In this guide, we use all
the default values for description, and take the configuration in Windows XP for example. While,
Pads or Wi-Fi cellphones by default obtain IP address and DNS server address automatically,
so you can just skip this step and continue with the
3.3 Wireless Connection
.
Note:
Before configuration, please make sure your computer has been equipped with a wireless
network adapter.
Obtain an IP address automatically
1)
Set up the TCP/IP Protocol in "
Obtain an IP address automatically
" mode on your PC.
Please refer to
Appendix B: Configuring the PC
for the detailed instructions.
2)
Then the built-in DHCP server will assign an IP address for the PC.
Configure the IP address manually
Set up the TCP/IP Protocol manually for your PC. Please refer to
Appendix B: Configuring
the PC
for the detailed instructions.
3.3 Wireless Connection
Note:
To log in the Device
‟s web
-based management page, you need to first connect to the wireless
network of the Device.
1.
Click the icon
at the bottom of your desktop.
2.
Click the refresh button
, and then select the SSID of M5350 and then click
Connect
.
Page 15 / 47
M5350
3G Mobile Wi-Fi User Guide
-8-
Note:
The default SSID (also called Wireless Network Name) of the device is
TP-LINK_M5_XXXXXX
(XXXXXX is the last 6 characters of the device
‟s MAC address
).
3.
Enter the wireless password you‟ve noted down in the Security Key field, and then click
OK
.
Note:
You can refer to the label on the rear cover for the default SSID and wireless password of
M5350.
4.
When
Connected
appears behind the SSID of M5350, y
ou‟ve successfully connected to
its wireless network.
Note:
You can enjoy the 3G mobile connection instantaneously, after the device has successfully
connected to M5350 (with a SIM card inserted) and M5350
‟
s OLED screen displays the network
status icon
. Otherwise, please continue with
3.4 Wizard
to further configure your device.
3.4 Wizard
1.
Open a web-browser, enter the default address
192.168.0.1
in the address field and then
press
Enter
. When the login window appears, enter
admin
(in lower case letters) for the
Password, and then click the
Log in
button or press the
Enter
.

Rate

4 / 5 based on 1 vote.

Popular TP-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top