Page 36 / 47
Scroll up to view Page 31 - 35
M5350
3G Mobile Wi-Fi User Guide
-29-
4.4.3.2. Client List
On this page, you can view the information about the clients attached to the device. All the
information is read-only. You cannot change any of the values on this page.
Figure 4-25 Clients List
ID:
The index of the DHCP Client.
Client Name:
The name of the DHCP client.
MAC Address:
The MAC address of the DHCP client.
IP Address:
The IP address the device has assigned to the DHCP client.
Lease Residual Time:
The rest lease time for the IP address assigned to the DHCP client.
The DHCP client will automatically apply to lengthen the lease time before the dynamic IP
address expires.
4.4.4 System Tools
Figure 4-26 System Tools menu
Under
System Tools
menu, you can do such configurations as backing up or uploading a
configuration file of the device, restoring all the settings of the device to its factory defaults,
modifying the password for your login, rebooting the device, and checking some information
Page 37 / 47
M5350
3G Mobile Wi-Fi User Guide
-30-
about the device. As follows, we will explain them in details.
4.4.4.1. Configuration
On this page, you can back up the configuration of the device to file, or upload a configuration
file to the device.
Figure 4-27 Configuration Management
Backup Configuration to File:
Click
Backup
to save the configuration file in your
computer, for later necessary use. It‟s strongly recommended to back up the old
configuration file before firmware upgrade or new configuration file upload, in case that
during those process it might get the original configuration lost.
Upload Configuration File:
Click
Browse
…
to locate the config.bin file or directly enter its
location file, and then click
Upload
to upload the configuration file.
4.4.4.2. Restore Factory
You can restore the device to its factory default settings, when necessary.
Page 38 / 47
M5350
3G Mobile Wi-Fi User Guide
-31-
Figure 4-28 Restore to factory defaults
Restore to Factory Defaults:
Click
Restore
to reset all configuration settings to their
default values. All of the settings you have saved will be lost when the default settings are
restored.
You can restore the following factory default values:
The default login
Password
: admin
The default
IP Address
The default
Subnet Mask
: 255.255.255.0
The default SSID: TP-LINK_M5_XXXXXX (
XXXXXX is the last 6 characters of the device‟s
MAC address). Please refer to the label on the rear cover of the device for the default
SSID.
The default Wireless Password: Please refer to the label on the rear cover of the device for
the default wireless password.
4.4.4.3. Modify Password
It is strongly recommended that you change the factory default login password of the device.
Page 39 / 47
M5350
3G Mobile Wi-Fi User Guide
-32-
Figure 4-29 Modify Login Password
Old Password:
The old password that is used to log in of the device.
New Password:
The new password you want to set for the login of the device.
Confirm New Password:
Enter the new password again for confirmation.
Click
Save
when you finish the setting.
Click
Clear
to clear all the values you have already set, and then you can reset it.
Note:
The new password must not exceed 14 characters in length and not include any spaces.
4.4.4.4. Reboot
Figure 4-30 Reboot the Device
Page 40 / 47
M5350
3G Mobile Wi-Fi User Guide
-33-
Reboot the Device:
Click
Reboot
to get the device rebooted and the saved settings to
take effect.
4.4.4.5. About Device
This page displays the related information about this device, including Model, Firmware Version,
Hardware Version, MAC Address, and IMEI.
Figure 4-31 Device Information
Model:
The Model of the device.
Firmware Version:
The current firmware version
Hardware Version:
The current hardware version.
MAC Address:
The physical address of the device. The value is read-only thus could not
be changed.
IMEI:
International Mobile Equipment Identity. Composed of 15 digits, it is unique and thus
used to identify individual mobile equipment.
19216811.live