1. Home
    2. /
  2. Manuals
    3. /
  3. TP-Link
    4. /
  4. Archer D9
    5. /
  5. 5
Page 21 / 125 Scroll up to view Page 16 - 20
Archer
D9
AC1900 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
Chapter 3. Quick Installation Guide
This chapter will show you how to configure the basic functions of your Archer D9 AC1900
Wireless Dual Band Gigabit ADSL2+ Modem Router using
Quick Setup
Wizard
within minutes.
3.1 TCP/IP Configuration
The default IP address of the Archer D9 AC1900 Wireless Dual Band Gigabit ADSL2+ Modem
Router is 192.168.1.1. And the default Subnet Mask is 255.255.255.0. These values can be
changed as you desire. In this guide, we use all the default values for description.
Connect the local PC to the LAN/WAN port of the modem router. And then you can configure your
PC in the following way.
1)
Set up the TCP/IP Protocol in "
Obtain an IP address automatically
" mode on your PC.
If you need instructions as to how to do this, please refer to
T3
in
Appendix B:
Troubleshooting
.
2)
Then the built-in DHCP server will assign IP address for the PC.
Now, you can run the Ping command in the command prompt to verify the network connection.
Please click the
Start
menu on your desktop, select
run
tab, type
cmd
or
command
in the field
and press
Enter
. Type
on the next screen, and then press
Enter
.
If the result displayed is similar to the screen below, the connection between your PC and the
router has been established.
If the result displayed is similar to the screen shown below, it means that your PC has not
connected to the router.
You can check it following the steps below:
1)
Is the connection between your PC and the router correct?
10
Page 22 / 125
Archer
D9
AC1900 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
The LEDs of LAN port which you link to the device and the LEDs on your PC's adapter should
be lit.
2)
Is the TCP/IP configuration for your PC correct?
If the router's IP address is 192.168.1.1, your PC's IP address must be within the range of
192.168.1.2 ~ 192.168.1.254.
3.2 Quick Installation Guide
With a Web-based utility, it is easy to configure and manage the Archer D9 AC1900 Wireless Dual
Band Gigabit ADSL2+ Modem Router. The Web-based utility can be used on any Windows,
Macintosh or UNIX OS with a Web browser, such as Microsoft Internet Explorer, Mozilla Firefox or
Apple Safari.
Step 1.
To access the configuration utility, open a web-browser and type the default address
http://tplinkmodem.net/
or
192.168.1.1
in the address field of the browser.
Figure 3-1
After a moment, a login window will appear, similar to the Figure 3-2. Enter
admin
for the
User Name and Password, both in lower case letters. Then click the
Login
button or
press the
Enter
key.
Figure 3-2
Note:
1)
Do not mix up the user name and password with your ADSL account user name and password
which are needed for PPP connections.
2)
If the above screen does not pop up, it means that your Web-browser has been set to a proxy.
Go to
Tools
menu
→
Internet Options
→
Connections
→
LAN Settings
, in the screen that
appears, cancel the Using Proxy checkbox, and click
OK
to finish it.
Step 2.
After your successful login, you will see the Login screen as shown in Figure 3-3. Click
Quick Setup
menu to access
Quick Setup
Wizard
.
11
Page 23 / 125
Archer
D9
AC1900 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
Figure 3-3
Step 3.
The
Quick Setup
page will appear for you to quickly configure your modem router. Click
Next
to continue.
Figure 3-4
Step 4.
Select the
Region
and the
Time Zone
from the drop-down list, and then click
Next
.
Figure 3-5
Step 5.
Select
Yes
to auto detect your connection type and then click
Next
. It will take about two
minutes, please wait.
Figure 3-6
Step 6.
Configure parameters for WAN connection. Here we take PPPoE as an example. Enter
username and password provided by your ISP and click
Next
to continue.
12
Page 24 / 125
Archer
D9
AC1900 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
Figure 3-7
Step 7.
Configure the basic parameters for 2.4GHz wireless network, and then click
Next
.
Figure 3-8
Step 8.
Configure the basic parameters for 5GHz wireless network and then click
Next
.
Figure 3-9
Step 9.
On this page, please confirm all parameters. Click
Save
and wait a moment for your
settings taking effect.
13
Page 25 / 125
Archer
D9
AC1900 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
Figure 3-10
Step 10.
You will see the
Complete
screen below. Click
Finish
to complete these settings.
Figure 3-11
The basic settings for your modem router are completed. Please open the web browser and try to
log on to
to test your Internet connection.
14

Rate

3.5 / 5 based on 2 votes.

Popular TP-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top