Page 36 / 43
Scroll up to view Page 31 - 35
XPLORER 871
36
5.
Windows will start copying files to your system. Then, click “Finish”.
6.
You will see the following screen prompting for the path of the Windows source files. Please specify a
location. Click “OK”.
3.2 CONFIGURING THE NETWORK PROPERTIES
This section describes the configuration required by LAN-attached PCs that communicate with the ADSL
Modem, either to configure the device, or for network access.
3.2.1 For
Windo
ws XP
1.
Go to Start / Control Panel (in Classic View). In the Control Panel, double-click on Network
Connections.
2.
Double-click Local Area Connection.
Downloaded from
www.Manualslib.com
manuals search engine
Page 37 / 43
XPLORER 871
37
3.
In the LAN Area Connection Status window, click Properties.
4.
Select Internet Protocol (TCP/IP) and click Properties.
Downloaded from
www.Manualslib.com
manuals search engine
Page 38 / 43
XPLORER 871
38
5.
Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio
buttons.
6.
Click OK to finish the configuration.
3.2.2 For
Windo
ws 2000
1.
Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and Dial-up
Connections.
2.
Double-click LAN Area Connection.
Downloaded from
www.Manualslib.com
manuals search engine
Page 39 / 43
XPLORER 871
39
3.
In the LAN Area Connection Status window, click Properties.
4.
Select Internet Protocol (TCP/IP) and click Properties.
Downloaded from
www.Manualslib.com
manuals search engine
Page 40 / 43
XPLORER 871
40
5.
Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio
buttons.
6.
Click OK to finish the configuration.
3.2.3 For
Windo
ws 95/98/Me
1.
Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and choose the
Configuration tab.
2.
Select TCP / IP -> NE2000 Compatible, or the name of any Network Interface Card (NIC) in your PC.
3.
Click Properties.
Downloaded from
www.Manualslib.com
manuals search engine
19216811.live