Topcom BR104 Router Manual PDF (Setup & Configuration Guide)
Given below is full router user manual of Topcom BR104 router model. You can also download this manual in PDF Format to read later on your computer.
Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.
Page 1 / 45
QUICK INSTALLATION GUIDE
GIDS VOOR SNELLE INSTALLATIE
QUICK INSTALLATION GUIDE
SCHNELLE INSTALLATIONSANLEITUNG
SNABBINSTALLATIONSGUIDE
HURTIG INSTALLATIONSGUIDE
HURTIGINSTALLASJON
NOPEA ASENNUSOPAS
BR104.book
Page 1
Friday, June 21, 2002
10:54 AM
Downloaded from
www.Manualslib.com
manuals search engine
Page 2 / 45
BR104.book
Page 2
Friday, June 21, 2002
10:54 AM
Downloaded from
www.Manualslib.com
manuals search engine
Page 3 / 45
3
ENGLISH
1
The rear panel
•
POWER (5V DC):
The power port is to connect the DC power adapter.
•
WAN :
The WAN Ethernet port is to connect your ASDL/Cable modem.
• Serial:
The Serial port is to connect a 56K serial modem (optional).
•
Ports 1- 4:
This is to connect networked devices, such as PCs, ftp servers or any-
thing else you want to put on your network.
• Uplink/Normal:
In the Uplink Mode, port 1 is where you can expand your network
by connecting to another switch or hub. In Normal Mode, port 1 does not have an up-
link function.
•
Reset Button:
If you would like to load default settings, press the reset button and
hold it for 5 - 6 seconds. It will load the factory default settings for the device. Do not
press the reset button unless you want to clear the current data.
2
Configuring the PC to connect to the Cable/DSL router
Remark
- The routers default IP address is:
192.168.2.1
- DHCP server is ON
If you do not wish to set a static IP address on your PC, you will need to configure your
PC to accept the IP address that the router will provide.
1 Click
Start
button, select
Settings
, then
Control Panel
2
Double-click the
Network
Icon
3
In the
configuration
windows, select the
TCP/IP protocol line
that has been
associated with your network card/adapter.
BR104.book
Page 3
Friday, June 21, 2002
10:54 AM
Downloaded from
www.Manualslib.com
manuals search engine
Page 4 / 45
4
4
Click the
Properties
button, then choose the
IP ADDRESS
tab. Select
Obtain an IP
address automatically
.
5
Then select
DNS configuration
tab to add
DNS IP address.
Select
Disable
DNS
function
. Press
OK
. You have completed the client settings.
6
After clicking
OK
, windows will ask you to restart the PC. Click
Yes
.
BR104.book
Page 4
Friday, June 21, 2002
10:54 AM
Downloaded from
www.Manualslib.com
manuals search engine
Page 5 / 45
5
ENGLISH
3
Verify your PC’s IP configuration
There are some tools which are great for finding out a computer’s IP configuration:
MAC address and default gateway.
•
WINIPCFG (for windows 95/98)
Inside the windows 95/98/ME
Start
button, select Run and type
winipcfg
. In the
example below this computer has a IP address of 192.168.2.100 and the default
gateway is 192.168.2.1. The default gateway should be the broadband routers IP
address. The MAC address in windows 95/98 is called the Adapter Address.
19216811.live