Page 26 / 43
Scroll up to view Page 21 - 25
XPLORER 871
26
2.5 TYPICAL APPLICATIONS
INTERNET
INTERNET
XPLORER 871
XPLORER 871
PC
PC
DHCP client
DHCP client
Ethernet or USB
Ethernet or USB
Adsl Line
Adsl Line
INTERNET
INTERNET
XPLORER 871
XPLORER 871
PC
PC
PPPoE client software (*)
PPPoE client software (*)
Ethernet or USB
Ethernet or USB
Adsl Line
Adsl Line
INTERNET
INTERNET
XPLORER 871
XPLORER 871
BROADBAND
ROUTER
BROADBAND
ROUTER
PC
PC
PC
PC
PC
PC
PC
PC
Ethernet
Ethernet
Ethernet
Ethernet
Ethernet
Ethernet
Ethernet
Ethernet
Ethernet
Ethernet
Adsl Line
Adsl Line
(*)
(*) not included
Downloaded from
www.Manualslib.com
manuals search engine
Page 27 / 43
XPLORER 871
27
3. INSTALLATION AND CONFIGURATION
3.1 INSTALLING THE USB DRIVER
!!! NOTE !!!
You only need to install the USB-drivers if you want to use the modem through your USB port and not
through
your Ethernet connection .
If you connect the ADSL Modem through the USB port for the first time to the PC, Windows will
automatically detect the device. Follow the steps to install the USB driver.
3.1.1 For
Windo
ws XP
1.
When Windows tells you that the new device has been detected, select “Install from a list or specific
location” and click “Next >”.
2.
Insert the installation CD into the CD-ROM drive. Check “Search removable media” and click
“Next
>”. Then, it takes seconds to search and install the software.
Downloaded from
www.Manualslib.com
manuals search engine
Page 28 / 43
XPLORER 871
28
3.
When windows titled “Hardware Installation” or “Software Installation” appear, press “Continue
Anyway” to go on.
4.
Then, click “Finish”.
Downloaded from
www.Manualslib.com
manuals search engine
Page 29 / 43
XPLORER 871
29
5.
After a few moments, Windows will show the new device, USB ADSL Adapter, has been detected.
Select “Install from a list or specific location”. Click “Next >”.
6.
Click “Next >” when the following figure appears.
7.
When windows titled “Hardware Installation” appears, press “Continue Anyway”.
Downloaded from
www.Manualslib.com
manuals search engine
Page 30 / 43
XPLORER 871
30
8.
Then, click “Finish” to end installation.
9.
After installing the driver, follow the section “3.2 Configuring the Network Properties” below to modify
the network settings on your PC.
3.1.2 For
Windo
ws 2000
1.
When Windows tells you that the new device has been detected, click “Next >” to continue.
2.
Select “Search for a suitable driver for my device”. Click “Next>”. Then, insert the installation CD into
the CD-ROM drive.
Downloaded from
www.Manualslib.com
manuals search engine
19216811.live