Thomson TG782T Router Manual PDF (Setup & Configuration Guide)

Page 76 / 90 Scroll up to view Page 71 - 75

E-DOC-CTC-20090619-0001 v1.0

70

8

Internet Security

3

In the

Pick a task

list, click

Activate Web Filtering

License.

4

The

Web Filtering Activation

page appears. Under

License Type

, select:

²

30-days evaluation

if you first want evaluate this feature.

²

Standard

if you have already purchased a license key. The License key box appears as soon as you

select this option. Type the license key that you received from your service provider in this box.

5

Click

Apply

.

Option 1: content-based filter (combined with the address-based filter)

If you want to use the content-based filtering:

1

Browse to the

Thomson Gateway GUI

.

2

On the

Toolbox

menu, click

Parental Control

.

3

On the

Navigation bar

, click

Configure

.

4

Make sure that the

Use Content-Based Filter

check box is selected.

5

Configure the content-based filter. For more information, see

“8.2.1 Configuring The Content-based

Filter” on page 71

.

6

If you want to make exceptions for specific web sites, add the necessary rules in the address-based filter.

For more information, see

“8.2.2 Adding Rules for the Address-Based Filter” on page 72

.

Option 2: address-based filter only

Take this option if content filtering is not available on your Thomson Gateway or you don’t want to use it.

To configure address-based filtering:

1

Browse to the

Thomson Gateway GUI

.

2

On the

Toolbox

menu, click

Parental Control

.

3

On the

Navigation bar

, click

Configure

.

4

Make sure that the

Use Address-Based Filter

check box is selected.

5

In the

Action for Unknown Sites

, select:

²

Allow

as the default rule if you want to allow access to

all

web sites and manually specify which web

sites may not be accessed.

²

Block

as the default rule if you want to deny access to

all

web sites and manually specify a number of

web sites that may be accessed.

6

Click

Apply

.

7

If you want to make exceptions for specific web sites, add the necessary rules in the address-based filter.

For more information, see

“8.2.2 Adding Rules for the Address-Based Filter” on page 72

.

Page 77 / 90

E-DOC-CTC-20090619-0001 v1.0

71

8

Internet Security

8.2.1

Configuring The Content-based Filter

Accessing the configuration page

Proceed as follows:

1

Browse to the

Thomson Gateway GUI

.

2

On the

Toolbox

menu, click

Parental Control

.

3

On the

Navigation bar

, click

Configure

.

4

Under

Content-Based Filtering

you can change the settings of the content-based filter.

Configuring the content-based filter

Under

Content-Based Filtering

:

1

Select

Use Content-Based Filter

check box (if needed).

2

In the

Action for uncategorised sites

list, select a default action for sites that have not yet been

categorised.

3

Under

Content Level

, select the content level you want to use.

If you want a more detailed view of the content that will be blocked for this level, click the

Edit

link next to

the content level.

If needed, you can change the

Name

,

Description

and

Configuration

of the content level.

4

Click

Apply

after you have made your changes.

Creating your own content level

Proceed as follows:

1

In the

Pick a task

list, click

Create a new content level

.

2

Enter a

Name

and

Description

for your content level and click

3

Under

Configuration

, select:

²

Clone Existing Level

if you want to start from an existing level. You can now select the level that you

want to clone.

²

White list

if you want to block everything and select which content should be allowed.

²

Black list

if you want to allow everything and select which content should be blocked.

Click

4

Under

Configuration

:

²

Select the check boxes of the categories/groups you want to allow.

²

Clear the check boxes of the categories/groups you want to block.

5

Click

Apply

.

6

Configure the content-based filter with the new level. For more information, see

“Configuring the

content-based filter” on page 71

.

Page 78 / 90

E-DOC-CTC-20090619-0001 v1.0

72

8

Internet Security

8.2.2

Adding Rules for the Address-Based Filter

Introduction

Address-based filtering has a higher priority than content-based filtering. This means that when you are

blocking a specific category, you can still access a specific site if you allow it in the address-based filter.

Example

If you block content from the

Finance / Investment

category and allow access to netbanking.mybank.com,

netbanking.mybank.com will still be accessible.

Options

With the address-based filter you can:

±

Deny access to a specific web site

.

±

Allow access to a specific web site

.

±

Redirect a web site

.

±

Redirect all web sites

.

Deny access to a specific web site

Proceed as follows:

1

Browse to the

Thomson Gateway GUI

.

2

On the

Toolbox

menu, click

Parental Control

.

3

Make sure the

Use Address-Based Filter

check box is selected.

4

Type the URL of the Web site you want to block (for example “mail.provider.com”) in the

Web Site

box.

5

In the

Action

list, click

Block

.

6

Click

Add

.

Allow access to a specific web site

Proceed as follows:

1

Browse to the

Thomson Gateway GUI

.

2

On the

Toolbox

menu, click

Parental Control

.

3

Make sure the

Use Address-Based Filter

check box is selected.

4

Type the URL of the Web site you want to allow (for example “netbanking.bank.com”) in the

Web Site

box.

5

Click

Allow

in the

Action

list.

6

Click

Add

.

Redirect a web site

Proceed as follows:

1

Browse to the

Thomson Gateway GUI

.

2

On the

Toolbox

menu, click

Parental Control

.

3

Make sure the

Use Address-Based Filter

check box is selected.

Page 79 / 90

E-DOC-CTC-20090619-0001 v1.0

73

8

Internet Security

4

Type the URL of the Web site you want to redirect (for example “cracks.am”) in the

Web Site

box.

5

Click

Redirect

in the

Action

list.

6

Type the URL of the Web site you want to redirect to (for example “mycompany.com/internetpolicy.htm”)

in the

Redirect

box.

7

Click

Add

.

Redirect all web sites

Proceed as follows:

1

Browse to the

Thomson Gateway GUI

.

2

On the

Toolbox

menu, click

Parental Control

.

3

Make sure the

Use Address-Based Filter

check box is selected.

4

Type “*” in the

Web Site

box.

5

Click

Redirect

in the

Action list

.

6

Type the URL of the Web site you want to redirect to (for example “mycompany.com/internetpolicy.htm”)

in the

Redirect

box.

7

Click

Add

.

Page 80 / 90

E-DOC-CTC-20090619-0001 v1.0

74

8

Internet Security

Rate

Popular Thomson Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share