Page 31 / 165 Scroll up to view Page 26 - 30
Telsey telecommunications
Web Interface
23
MT500--SIEN12
Route
The following page shows the routing information.
ARP
The following page shows the ARP configuration.
Page 32 / 165
Telsey
telecommunications
Web Interface
MT500--SIEN12
24
QUICK SETUP
Quick Setup
enables a user-friendly interface to configure CPVA500.
DSL Auto-connect
is a feature that automatically scans PVC and tries to
estabilish an ADSL connection. This feature, though, takes a long time,
especially for the VPI/VCI scanning. We suggest to obtain the correct network
settings from the ISP and then manually configure the CPVA500, by deselecting
“DSL Auto-Connect” check box.
An example of DSL Auto-Connect configuration page is shown in the following
figure:
Page 33 / 165
Telsey telecommunications
Web Interface
25
MT500--SIEN12
If DSL Auto-Connect is not selected, then it is possible to manually configure
VPI/VCI, Connection Type, WAN IP Settings. For all the information regarding
these settings, please refer to the Advanced Setup section starting from
page 28.
Page 34 / 165
Telsey
telecommunications
Web Interface
MT500--SIEN12
26
Quick setup navigation menu can be represented in the following diagram.
* In case of configuration via “Quick Setup”,
Device Setup for LAN interface
can be configured by setting the following page (for
PPPoA, PPPoE, MER, IPoA
):
VPI/VCI
Connection Type
PPPoA
PPPoE
MER
IPoA
Bridging
PPP Username
Password
WAN IP
Settings
NAT, QoS
Bridge IP
Settings
LAN Device Setup*
Summary
WAN, QoS
Page 35 / 165
Telsey telecommunications
Web Interface
27
MT500--SIEN12
LAN Device Setup
for
Bridging mode
is represented in the following page.

Rate

4 / 5 based on 1 vote.

Popular Telsey Models

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top