Page 76 / 165
Scroll up to view Page 71 - 75
Telsey
telecommunications
Web Interface
MT500--SIEN12
68
Click on “Enable” in the
Access Control Mode
to enable Access Control list. Then
click on “Add” to add a new IP address.
After clicking on Add, the following page shows up.
Page 77 / 165
Telsey telecommunications
Web Interface
69
MT500--SIEN12
Warning
Be careful when adding a new IP address in the Access Control list.
The device will be unreachable in case it is contacted by an IP address
not included in the ACL.
Passwords
By clicking on
Passwords
the following page shows up.
It is possible to set a password for the following profiles:
•
admin
- gives unrestricted access to change the configuration of
the router. Max password length is 16 characters.
•
support -
gives
access for router maintenance and diagnostics.
Max password length is 16 characters.
•
user -
gives access to view the configuration, statistics, and to
update the router software. Max password length is 16 characters.
Click on “Save/Apply” to store the new passwords.
Update Software
The
Update Software
screen allows you to obtain an updated software image
file from your ISP. Manual software upgrades from a locally stored file can be
performed using the following screen.
Select the new image file after clicking the Browse button. Click the Update
Software button. Completion of this step takes about two minutes to complete.
The CPVA500 will reboot in the process.
Page 78 / 165
Telsey
telecommunications
Web Interface
MT500--SIEN12
70
Note
Updating the software requires a system reboot. During this time, the
current WEB UI screen will be temporarily unavailable, but will come
back to the Device Info page after the system is up again.
Configuration data stored in the ADSL router flash memory is retained
after the software upgrade.
Save/Reboot
This page allows you to easily reboot CPVA500 router by clicking on “Save/
Reboot” button.
Page 79 / 165
Telsey telecommunications
Web Interface
71
MT500--SIEN12
RESTORE FACTORY DEFAULT SETTINGS
In case of a misconfiguration, CPVA500 could become unreachable. For this
reason, a crash recovery procedure has been introduced starting from SIP
software version 1.0.2.
Initial conditions
•
CPVA500 not reacheable
•
Phone line unregistered
Procedure
Default factory settings (as reported on page 17) can be restored by using a
telephone connected to
Line2
and by dialling the following string:
###*1973*5*2846*147896325*###
19216811.live