Page 6 / 120
Scroll up to view Page 1 - 5
LTE/WiMAX DM Outdoor | User Manual
Dual Mode CPE7000 Manual
6
6
bold
Menu commands, buttons and input fields are displayed in bold
Introduction
Product Overview
Introduction
Telrad's Dual Mode Outdoor CPE 7000 solution is a premium unit designed to suport a seamless
migration from WiMAX to TD-LTE for operators and ISPs. The cost-effective, rugged outdoor CPE
supports both Data and VoIP, offering the folowing benefits:
Dual Mode WiMAX/LTE solution enabling transition from WiMAX to TD-LTE
TD-LTE
–
3GPP Release 9, UE Category 4
Supports wired (LAN) and wireless (WiFi) Data ports and VoIP port
High gain 15dBi embedded Antenna
Easy installation saves time and money
Device Management
–
Web and TR69
IP67 environmental rating
–
fully ruggedized, suitable for the harshest outdoor
deployment scenarios
The Dual Mode Outdoor CPE 7000 has two installation options using different indoor PoE
accessories as follow:
Page 7 / 120
LTE/WiMAX DM Outdoor | User Manual
Dual Mode CPE7000 Manual
7
7
1.
PoE Adapter
with one LAN/RJ45 and two VoIP/POTS interfaces (included in outdoor CPE PN)
2.
Residential Gateway
with WiFi AP, two LAN/RJ45 and one one VoIP/POTS interfaces
(dedicated PN, should be purchased separately
–
when required)
Outdoor CPE 7000 - WiMAX & LTE Specifications
LTE Interface
WiMAX Interface
Standard Compliance
3GPP Rev. 9, UE Cat 4
IEEE 802.16e-2005
Duplex Mode
TDD
TDD
Frequency Bands
40, 41, 42, 43
PN 725060:
2.3-2.4 and 2.5-2.7
GHz
PN 735060:
3.4-3.6 and 3.6-3.8
GHz
Channel bandwidth
(MHz)
5, 10, 20
5, 7, 10
Modulation
DL: MCS1 - MCS28 (QPSK,
16QAM, 64QAM)
UL: MCS1
–
MCS16 (QPSK,
16QAM)
DL: QPSK, 16QAM, 64QAM
UL: QPSK, 16QAM, 64QAM
L1
MIMO TM1, TM2, TM3
MIMO A/B
Page 8 / 120
LTE/WiMAX DM Outdoor | User Manual
Dual Mode CPE7000 Manual
8
8
L2 & L3
Multiple APN
PLMN and Cell Selection
IP and Eth CS
Authentication
USIM and SIM function
EAP-TTLS, EAP-TLS
QoS
Non-GBR, GBR
BE, UGS, rtPS, ertPS, nrtPS
MTU Size
1,500 bytes
1,500 bytes
Outdoor CPE 7000
–
Mechanical / Electrical / Physical Specifications
Dimensions (HxWxD)
260 x 250 x 80 mm / 10.2 x 9.8 x 3.1 in
Weight
1.2 Kg | 2.6 lbs
Physical Interface
LAN - 100 Base-T port
Voice - RJ11/RJ14
SIM - 1.8V and 3.3V
Maximum Transmit
Power
2.X GHz: 23 dBm
3.X GHz: 27dBm for WiMAX, 23 dBm for TD-LTE
Antenna
1TX/2RX, 15dBi
Power Source
PoE
Environmental
IP67 - withstands harsh weather and outdoor environments
Operating Temperature
-40° to 55 C | -40° to 131° F
Humidity
5% to 95% non-condensing
ESD Rating
+/-15KV
Power Consumption
6.7W
Regulatory Compliance
2.X GHz:
CE: 2.3-2.4 GHz and 2.5-2.7 GHz
FCC: 2.5-2.7 GHz
IC: 2.3-2.4 GHz
3.X GHz:
CE: 3.4-3.8 GHz
FCC: 3.65-3.7 GHz
IC: 3.475-3.7 GHz
PoE Adapter Specification
Power Source
100~240VAC
Output Power (PoE)
56V / 0.45A
User Interfaces
2xVoIP POTS ports + 1xLAN RJ45 Cable
To Outdoor CPE
Interfaces
1xPoE (RJ45) port + 1xVoIP (RJ14) port
Page 9 / 120
LTE/WiMAX DM Outdoor | User Manual
Dual Mode CPE7000 Manual
9
9
Residential Gateway Specifications
Power Source
56VDC using the supplied PSU adapter
Output Power (WAN -
PoE)
56VDC / 0.45A
User Interfaces
Embedded WiFi AP + 1xVoIP POTS (RJ11) ports + 2xLAN RJ45 Cable
To Outdoor CPE
Interfaces
1xPoE (RJ45) port
Embedded WiFi AP
2.4 GHz (2x2 MIMO) with IEEE 802.11 b/g/n fully compliant
LED Indicators
Status indicators about: Power / System / LTE signal Strength / LAN1 &
LAN2 / WAN / WLAN / WPS / Phone
Environmental
Indoor
Operating Temperature
0° to 40 C
Humidity
0% to 95% non-condensing
Regulatory
Specification
Radio-WiFi EN 300 328 (V1.8.1 )
Safety EN 60950-1
EMC EN 301 489-1/-4/-17/-24
Dimensions (HxWxD)
173 x 128 x 34 mm
Product Package
Item
Qty
1
LTE/WiMAX Outdoor CPE
1
2
Quick Installation Guide
1
3
Power Adapter
1
4
Pole installation kit
1
If any item of mentioned above is missing or damaged, please contact
our customer support immediately.
Page 10 / 120
LTE/WiMAX DM Outdoor | User Manual
Dual Mode CPE7000 Manual
10
10
Connectors
The CPE7000 Outdoor has the following connectors (from left to right):
1.
One RJ-14 connector for connecting to a telephone line.
2.
One RJ-45 connector for connecting to the PoE adaptor.
3.
LED indicator inside and SIM card slot for inserting SIM card.
4.
A grounding screw on the rear panel.
19216811.live