Page 21 / 69
Scroll up to view Page 16 - 20
Page 21 of 69
Figure 18 Quick Setup – WAN Setup – Summary
The last page gives a summary of previous steps. Make sure that the
settings match the settings provided by ISP, and then click on
“Save/Reboot” button to complete the configuration procedure.
3.3.4
MAC Encapsulation Routing (MER) Configuration
Click on “Quick Setup” in the left frame, and follow the steps below to create a
MAC Encapsulation Routing (MER) connection.
3.3.4.1
ATM PVC and QoS Configuration
Please refer to 3.3.1.1.
3.3.4.2
Connection Type
Page 22 / 69
Page 22 of 69
Figure 19. Quick Setup – Connection Type and Encapsulation Mode
Select “MAC Encapsulation Routing (MER)”, and the “Encapsulation
Mode”. Please contact you ISP for the information.
Click on “Next” to go to next step.
3.3.4.3
WAN IP Settings
Page 23 / 69
Page 23 of 69
Figure 20. Quick Setup – WAN IP Settings
WAN IP/Subnet Mask, Default Gateway, and DNS Server can either
be obtained automatically or set manually.
The WAN IP can be either fixed (assigned by your ISP) or dynamic
(via DHCP Client). Enter the “Vendor ID” if DHCP Client is selected
and your ISP requests for it.
Click on “Next” to go to next step.
3.3.4.4
NAT, IGMP Multicast and WAN service
Please refer to 3.3.2.4.
3.3.4.5
Device Setup
Please refer to 3.3.1.5.
3.3.4.6
Wireless – Setup
Please refer to 3.3.1.6.
3.3.4.7
WAN Setup – Summery
Page 24 / 69
Page 24 of 69
Figure 21. Quick Setup – WAN Setup – Summary
The last page gives a summary of previous steps. Make sure that the
settings match the settings provided by ISP, and then click on
“Save/Reboot” button to complete the configuration procedure
3.3.5
PPP over ATM (PPPoA) Configuration
Click on “Quick Setup” in the left frame, and follow the steps below to create a
PPP over ATM (PPPoA) connection. The following setting steps are all the
same as PPP over ATM (PPPoE) steps.
3.3.5.1
ATM PVC Configuration
Give the VPI/VCI values. Please refer to 3.3.1.1.
3.3.5.2
Connection Type
Page 25 / 69
Page 25 of 69
Figure 22. Quick Setup – Connection Type and Encapsulation Mode
Please refer to 3.3.1.2
3.3.5.3
PPP Username and Password
Figure 23. Quick Setup – PPP Username and Password
Give “PPP Username”, “PPP Password”, and select “Authentication
Method” (AUTO/PAP/CHAP). Enable/disable “Dial on demand” and
19216811.live