Tecom AH4021 Router Manual PDF (Setup & Configuration Guide)

Page 11 / 69 Scroll up to view Page 6 - 10

Page 11 of 69

3.3

Quick Setup

The system administrator can configure the AH4021 remotely or locally via a Web

Browser. Network configuration need to be planned and decided before starting the

configuration procedure.

Quick Setup allows system administrator to select the appropriate operation mode and

configure the corresponding settings step by step to create a connection.

The following five operation modes are supported:

PPP over Ethernet (PPPoE)

IP over ATM (IPoA)

Bridging

MAC Encapsulation Routing (MER)

PPP over ATM (PPPoA)

3.3.1

PPP over Ethernet (PPPoE) Configuration

Click on “Quick Setup” in the left frame, and follow the steps below to create a

PPP over Ethernet (PPPoE) connection.

3.3.1.1

ATM PVC and QoS Configuration

Figure 4. Quick Setup – ATM PVC and QoS Configuration

Give the VPI/VCI values. Please contact you ISP for the information.

Enable the QoS function for this PVC here. Use Advanced

Setup/Quality of Service to assign priorities for the application.

Click on “Next” to go to next step.

Page 12 / 69

Page 12 of 69

3.3.1.2

Connection Type and Encapsulation Mode

Figure 5. Quick Setup – Connection Type and Encapsulation Mode

Select “PPP over Ethernet (PPPoE)”, and the “Encapsulation Mode”.

Please contact you ISP for the information.

Click on “Next” to go to next step.

3.3.1.3

PPP Username and Password

Page 13 / 69

Page 13 of 69

Figure 6. Quick Setup – PPP Username and Password

Give “PPP Username”, “PPP Password”, and select “Authentication

Method” (AUTO/PAP/CHAP). Please contact you ISP for the

information.

The “Dial On Demand” function, if checked, will tear down the PPP

link automatically if there is no outgoing packet for the programmed

period of time which is set below.

The “PPP IP extension” function, if checked, will assign the IP

address got from the ISP to the internal PC via DHCP. In this mode,

the internal PC will be assigned with a public IP got from PPP, and

AH4021 will act as a bridge between the PC and PPPoE server.

The “Concurrent Bridge” function, if checked, will enable Bridge

service simultaneously while PPPoE is operating. In this mode, other

services such as VoIP/Video can use the Bridge interface. It is useful

when the service provider of Data service is different from VoIP/Video.

When the “Concurrent Bridge” is enabled, AH4021 will activate the

DHCP Client on the Bridge interface. If your ISP requests for DHCP

“Vendor ID” option, please fill in the string in “Option 60”.

AH4021 set up PPPoE connection automatically when there does not

exist the PPPoE connection in it

and user wants to send traffic to ISP

The users is able to assign some specific ATM PVC(s) to run PPPoE,

when AH4021

is with multiple ATM PVC connection

Click on “Next” to go to next step.

3.3.1.4

IGMP Multicast and WAN service

Figure 7. Quick Setup – IGMP Multicast and WAN service

Check to Enable/Disable IGMP Multicast and WAN Service.

Page 14 / 69

Page 14 of 69

Click on “Next” to go to next step.

3.3.1.5

Device Setup

Figure 8. Quick Setup – Device Setup

Give IP (LAN IP) and Subnet Mask to the device.

Select to Disable/Enable DHCP Server and configure related settings

for that mode.

If necessary, check the “Secondary IP” to configure the secondary IP

address and Subnet Mask for LAN. This IP address is used for

management only.

Note that Network Address Translation function (NAT) is default

enabled and is not showing on the page to prevent it from being

disabled.

Click on “Next” to go to next step.

3.3.1.6

Wireless – Setup

Page 15 / 69

Page 15 of 69

Figure 9. Quick Setup – Wireless – Setup

Enable the WiFi function here and configure the SSID for the WiFi

interface.

3.3.1.7

WAN Setup – Summery

Figure 10. Quick Setup – WAN Setup – Summary

The last page gives a summary of previous steps. Make sure that the

Rate

Popular Tecom Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share