Page 41 / 69
Scroll up to view Page 36 - 40
Page 41 of 69
Figure 42. Advanced Setup – DNS – DNS Server
If 'Enable Automatic Assigned DNS' checkbox is selected, this router
will accept the first received DNS assignment from one of the PPPoA,
PPPoE or MER/DHCP enabled PVC(s) during the connection
establishment. If the checkbox is not selected, enter the primary and
optional secondary DNS server IP addresses. Click 'Save' button to
save the new configuration. You must reboot the router to make the
new configuration effective.
3.4.7.2
Dynamic DNS
Page 42 / 69
Page 42 of 69
Figure 43. Advanced Setup – DNS – Dynamic DNS
Figure 44. Advanced Setup – DNS – Dynamic DNS – Add
The Dynamic DNS service allows you to alias a dynamic IP address to
a static hostname in any of the many domains, allowing your DSL
router to be more easily accessed from various locations on the
Internet.
Page 44 / 69
Page 44 of 69
Figure 45. Advanced Setup – DSL
Change the settings only you know the actual meaning of each setting.
Please leave as it if you don’t know how to configure it.
3.4.9
Port Mapping
Figure 46. Advanced Setup – Port Mapping
Page 45 / 69
Page 45 of 69
Figure 47. Advanced Setup – Port Mapping – More than one Bridge interfaces
Port Mapping supports multiple ports to PVC and bridging groups. Each group
will perform as an independent network. To support this feature, you must
create mapping groups with appropriate LAN and WAN interfaces using the
Add button. The Remove button will remove the grouping and add the
ungrouped interfaces to the Default group.
The number of the entry you can add depends on how many Bridge interfaces
exist.
19216811.live