1. Home
    2. /
  2. Manuals
    3. /
  3. Technicolor
    4. /
  4. TG799vn-v2
    5. /
  5. 4
Page 16 / 128 Scroll up to view Page 11 - 15
8
1 GETTING STARTED
DMS-CTC-20110713-0016 v2.0
1.3.2
Local Network Connection
Overview
Wireless Access Point
The built-in WiFi-certified wireless access point provides wireless access to your WiFi-certified wireless clients.
For more information, see
“5 The MediaAccess Gateway Wireless Access Point” on page 43
.
Ethernet switch
The Ethernet switch
(
)
allows you to connect an Ethernet device (for example, a computer) to your local network. For
more information, see
“3.3 Connecting Your Network Devices to the MediaAccess Gateway” on page 28
.
All Ethernet ports on the MediaAccess Gateway are Gigabit Ethernet ports and have a maximum speed of 1 Gbps (Gigabit
per second).
A LED may be provided per Ethernet port to indicate link integrity (or activity).
USB Port
The USB port
(
)
can be used to:
Connect a USB mass storage device to
share your content
(for example, music, movies,...):
On your local network via the
Network File server
or the
UPnP AV Media Server
.
On Internet via
FTP
.
For more information, see
“8 Sharing Content” on page 69
.
Connect a 3G mobile adaptor to set up a 3G connection that can work as a backup for your main Internet connection.
For more information, see
“3.5 Setting Up the 3G Fall-Back WAN Connection” on page 32
.
LED Status
Description
Solid on
Device connected.
Blinking
Device connected and sending/receiving data.
Off
No device connected.
Page 17 / 128
9
1 GETTING STARTED
DMS-CTC-20110713-0016 v2.0
1.3.3
Broadband Connection
Overview
DSL port
This port can be used to connect your MediaAccess Gateway to your service provider’s DSL network.
For more information, see
“3.1 Connecting the MediaAccess Gateway to your Service Provider’s Network” on page 22
.
WAN port
This port allows you to use your MediaAccess Gateway as
Local Router
. For more information, see
“1.2 User Scenarios” on
page 5
.
WAN
DSL
WAN
DSL
Page 18 / 128
10
1 GETTING STARTED
DMS-CTC-20110713-0016 v2.0
1.3.4
Voice Connection
Overview
DECT base station
The integrated DECT base station allows you to connect your DECT phones to the MediaAccess Gateway. This way you
will be able to make phone calls over the Internet and save on communication costs, especially for long-distance calls.
Phone Port
The
Phone
(
) port allows you to connect a traditional phone to your MediaAccess Gateway. This way you will be able to
make phone calls over the Internet and save on communication costs, especially for long-distance calls.
For more information, see
“6.1 Setting Up Your Telephone Network” on page 52
.
PSTN Port (optional)
The
PSTN
port allows you to connect the MediaAccess Gateway to the traditional telephone network, i.e. the Public
Switched Telephone Network (PSTN). When the VoIP connection is not available, the MediaAccess Gateway will
automatically switch from VoIP to the traditional telephone network.
For more information, see
“6.1.2 Connection to the Traditional Telephone Network” on page 54
.
PSTN
Phone
PSTN
Phone
If your MediaAccess Gateway does not have a
PSTN
port, this means that:
Your MediaAccess Gateways has an integrated filter
The MediaAccess Gateway separates the phone signal from the signal coming from the
DSL port
. Your
MediaAccess Gateway has an integrated filter if the product name printed on the label of your MediaAccess
Gateway ends with “wIF” (
w
ith
I
ntegrated
F
ilter). If this suffix is not present, then your MediaAccess Gateway
does not have an integrated filter.
- or -
Your MediaAccess Gateway is VoIP-only
All calls passing through the MediaAccess Gateway will be done via VoIP.
Be aware that, if you are not connected to the traditional telephone network, emergency calls will not be possible
when your Internet connection is down or your MediaAccess Gateway is powered off.
Page 19 / 128
11
1 GETTING STARTED
DMS-CTC-20110713-0016 v2.0
1.3.5 Buttons
Overview
Info
button
The
Info
(
) button allows you to enable the status LEDs. For more information, see
“1.3.6 Status LEDs” on page 12
.
DECT Pairing/Paging button
If you press the DECT pairing/paging
button:
Between 1 and 5 seconds, the MediaAccess Gateway pages all connected DECT phones.
Longer than 5 seconds, switches to registration mode to allow you to connect your DECT phone(s) to the integrated
DECT base station of the MediaAccess Gateway.
For more information, see
“6.1.1 Connecting a DECT Phone to Your MediaAccess Gateway” on page 53
.
WPS button
The WPS (
) button allows you to add new wireless clients to your network in a swift and easy way, without the need to
enter any of your wireless settings manually.
For more information, see
“5.1 Connecting Your Wireless Client via WPS” on page 44
.
ECO button
The
ECO
(
) button allows you to disable your wireless access point. You can do this when you are not using the wireless
access point. This allows you to save the energy that the MediaAccess Gateway would be using for the wireless access point.
For more information, see
“ECO button” on page 67
.
The LED on the ECO button summarizes the overall status of your MediaAccess Gateway. For more information, see
“ECO LED” on page 12
.
Reset button
The
Reset
button allows you to reset your MediaAccess Gateway to factory defaults.
For more information, see
“11.7 Reset to Factory Defaults” on page 116
.
Reset
WPS
DECT
Reset
Page 20 / 128
12
1 GETTING STARTED
DMS-CTC-20110713-0016 v2.0
1.3.6
Status LEDs
Introduction
On the top panel of your MediaAccess Gateway, you can find a number of status LEDs, indicating the state of the device.
ECO LED
The ECO (
) LED provides information about the overall state of your MediaAccess Gateway. For more information,
see
“ECO button” on page 11
.
ECO
Ethernet
Voice
Wireless
DECT
Broadband
Internet
WPS
TV
ECO
Ethernet
Voice
Wireless
DECT
Broadband
Internet
WPS
TV
Colour
State
Description
Green
Solid on
All services are available. The wireless access point is
enabled
. The other
status LEDs are deactivated.
Blue
Solid on
All services are available. The wireless access point is
disabled
. The other
status LEDs are deactivated.
Red
Solid on
Some services are not available. The MediaAccess Gateway automatically
activates the other status LEDs to allow you to see which services are
running.
Orange
Solid on
Bootloader selftest
Blinking
Bootloader active (during upgrade)
Off
The MediaAccess Gateway is powered off.
The other status LEDs are only activated when the Internet service is down.

Rate

4.5 / 5 based on 2 votes.

Popular Technicolor Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top